Document 438-1
Shielded Power Inductors
–
LPS3008
• Very low DCR; excellent current handling
• Only 0.8 mm tall; 3.0 × 3.0 mm footprint
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 22 – 25 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
20% (ꢀµ) (Ohms) (Mµz) drop drop drop rise rise
LPS3008-104MRC
Termination: R=RoHS compliant matte tin over
nickel over silver.
Part number1
LPS3008-561MR_
LPS3008-801MR_
LPS3008-102MR_
LPS3008-152MR_
LPS3008-222MR_
0.56
0.80
1.0
1.5
2.2
0.072 330
0.092 255
0.125 220
0.134 170
0.175 150
1.8
1.6
1.3
1.1
1.0
2.0
1.7
1.4
1.3
1.1
2.1
1.8
1.5
1.3
1.1
1.4
1.1
2.0
1.6
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
0.90 1.3
0.87 1.2
0.85 1.1
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
LPS3008-332MR_
LPS3008-472MR_
LPS3008-562MR_
LPS3008-682MR_
LPS3008-822MR_
3.3
4.7
5.6
6.8
8.2
0.285 114
0.81 0.86 0.88 0.74 0.95
0.68 0.73 0.74 0.68 0.80
0.62 0.67 0.70 0.58 0.73
0.58 0.61 0.63 0.50 0.67
0.52 0.56 0.58 0.45 0.60
B=Less than full reel. In tape, but not
machine ready. To have a leader
and trailer added ($25 charge), use
code letter C instead.
D=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
0.350
0.450
0.500
0.600
87
78
75
61
LPS3008-103MR_
LPS3008-123MR_
LPS3008-183MR_
LPS3008-223MR_
LPS3008-333MR_
10
0.650
0.790
1.25
1.50
2.30
56
49
38
35
23
0.46 0.51 0.52 0.42 0.56
0.45 0.48 0.50 0.38 0.50
0.35 0.38 0.40 0.33 0.44
0.29 0.33 0.34 0.29 0.38
0.27 0.30 0.31 0.25 0.32
12
18
22
33
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or
equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
LPS3008-473MR_
LPS3008-683MR_
LPS3008-104MR_ 100
LPS3008-124MR_ 120
LPS3008-154MR_ 150
47
68
3.00
4.75
6.85
7.00
8.00
21
18
14
13
11
0.22 0.23 0.24 0.21 0.27
0.18 0.19 0.20 0.175 0.23
0.15 0.16 0.16 0.160 0.21
0.084 0.094 0.10 0.140 0.190
0.080 0.088 0.092 0.130 0.175
LPS3008-184MR_ 180
9.00
10
0.070 0.078 0.082 0.120 0.160
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Compo-
nents” before soldering.
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and
to order, contact Coilcraft or visit http://order.coilcraft.com.
Document 438-1 Revised 08/02/13
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.