5秒后页面跳转
LPC11CX2 PDF预览

LPC11CX2

更新时间: 2022-11-14 09:55:20
品牌 Logo 应用领域
恩智浦 - NXP 闪存微控制器静态存储器
页数 文件大小 规格书
61页 1397K
描述
32-bit ARM Cortex-M0 microcontroller; 16/32 kB flash, 8 kB SRAM C_CAN

LPC11CX2 数据手册

 浏览型号LPC11CX2的Datasheet PDF文件第2页浏览型号LPC11CX2的Datasheet PDF文件第3页浏览型号LPC11CX2的Datasheet PDF文件第4页浏览型号LPC11CX2的Datasheet PDF文件第5页浏览型号LPC11CX2的Datasheet PDF文件第6页浏览型号LPC11CX2的Datasheet PDF文件第7页 
LPC11Cx2/Cx4  
32-bit ARM Cortex-M0 microcontroller; 16/32 kB flash, 8 kB  
SRAM; C_CAN  
Rev. 2 — 3 December 2010  
Product data sheet  
1. General description  
The LPC11Cx2/Cx4 are an ARM Cortex-M0 based, low-cost 32-bit MCU family, designed  
for 8/16-bit microcontroller applications, offering performance, low power, simple  
instruction set and memory addressing together with reduced code size compared to  
existing 8/16-bit architectures.  
The LPC11Cx2/Cx4 operate at CPU frequencies of up to 50 MHz.  
The peripheral complement of the LPC11Cx2/Cx4 includes 16/32 kB of flash memory,  
8 kB of data memory, one C_CAN controller, one Fast-mode Plus I2C-bus interface, one  
RS-485/EIA-485 UART, two SPI interfaces with SSP features, four general purpose  
counter/timers, a 10-bit ADC, and up to 40 general purpose I/O pins.  
On-chip C_CAN drivers and flash In-System Programming tools via C_CAN are included.  
In addition, the LPC11C22 and LPC11C24 parts include an on-chip, high-speed CAN  
transceiver.  
2. Features and benefits  
System:  
ARM Cortex-M0 processor, running at frequencies of up to 50 MHz.  
ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).  
Serial Wire Debug.  
System tick timer.  
Memory:  
32 kB (LPC11Cx4) or 16 kB (LPC11Cx2) on-chip flash program memory.  
8 kB SRAM data memory.  
In-System Programming (ISP) and In-Application Programming (IAP) via on-chip  
bootloader software.  
Flash ISP commands can be issued via UART or C_CAN.  
Digital peripherals:  
General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors.  
40 GPIO pins on the LPC11C12/C14 parts; 36 GPIO pins on the LPC11C22/C24  
parts.  
GPIO pins can be used as edge and level sensitive interrupt sources.  
High-current output driver (20 mA) on one pin.  
High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.  
Four general purpose counter/timers with a total of four capture inputs and 13  
(LPC11C12/C14) or 12 (LPC11C22/C24) match outputs.  

与LPC11CX2相关器件

型号 品牌 描述 获取价格 数据表
LPC11CX2_11 NXP 32-bit ARM Cortex-M0 microcontroller; 16/32 kB flash, 8 kB SRAM; C_CAN

获取价格

LPC11CX4 NXP 32-bit ARM Cortex-M0 microcontroller; 16/32 kB flash, 8 kB SRAM C_CAN

获取价格

LPC11CXX NXP NXP LPC microcontrollers

获取价格

LPC11D14 NXP LPC111x/LPC11Cxx User manual

获取价格

LPC11D14FBD100 NXP Scalable Entry Level 32-bit Microcontroller (MCU) based on ARM Cortex-M0+/M0 Cores

获取价格

LPC11DXX NXP NXP LPC microcontrollers

获取价格