20W Single Output Switching Power Supply
LPC-20 series
Features :
Constant current mode power supply
Universal AC input / Full range
Epoxy encapsulated with IP67 level
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Over current / Over voltage
Fully isolated plastic case
Cooling by free air convection
Small and compact size
UL1310 Class 2 power unit, pass LPS
100% full load burn-in test
Low cost, high reliability
Suitable for LED lighting and moving sign applications
2 years warranty
IP67
( for 48V only)
( except for 48V )
LPS
SPECIFICATION
MODEL
LPC-20-350
LPC-20-700
DC VOLTAGE
48V
30V
DC VOLTAGE RANGE
CURRENT RANGE
RATED POWER
3 ~ 48V
350mA
16.8W
3 ~ 30V
700mA
21W
RIPPLE & NOISE (max.) Note.2 200mVp-p
VOLTAGE TOLERANCE Note.3 5.0%
200mVp-p
OUTPUT
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT
1.0%
2.0%
Note.6 500ms, 250ms / 230VAC 500ms, 250ms / 115VAC at full load
50ms/230VAC
90 ~ 264VAC
47 ~ 63Hz
83%
24ms/115VAC at full load
INPUT
0.55A/115VAC 0.35A/230VAC
COLD STAR 35A/115VAC
0.25mA / 240VAC
INRUSH CURRENT(max.)
LEAKAGE CURRENT
70A/230VAC
5% rated output current
CURRENT LIMIT
OVER VOLTAGE
Note.4
Protection type : Constant current limiting type
50.4 ~ 60V
PROTECTION
ENVIRONMENT
31.5 ~ 40.5V
Protection type : Shut off o/p voltage, clamping by zener diode
-30~ +70 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +80 , 10 ~ 95% RH
0.03%/ (0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
UL1310 Class 2, CAN/CSA C22.2 No. 223-M91(except for 48V), IP67 approved, design refer to TUV EN60950-1, EN61347-2-13
I/P-O/P:3KVAC
SAFETY &
EMC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
EMS IMMUNITY
MTBF
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
786.5Khrs min. MIL-HDBK-217F (25
)
OTHERS
NOTE
DIMENSION
118*35*26mm (L*W*H)
0.22Kg; 60pcs/14.2Kg/0.62CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
File Name:LPC-20-SPEC 2008-12-11