LP5910
LP5910
www.ti.com
SNVSA91F – SEPTEMBER 2015 – REVISED APRIL 2021
SNVSA91F – SEPTEMBER 2015 – REVISED APRIL 2021
LP5910 300-mA Low-Noise, Low-IQ LDO
1 Features
3 Description
•
•
•
•
•
•
•
•
•
•
•
•
•
Input voltage range: 1.3 V to 3.3 V
Output voltage range: 0.8 V to 2.3 V
Output current: 300 mA
The LP5910 is a low-noise LDO that can supply
up to 300 mA of output current. Designed to meet
the requirements of RF and analog circuits, this
device provides low noise, high PSRR, low quiescent
current, and superior line transient and load transient
response. Using new innovative design techniques
the LP5910 offers class-leading noise performance
without a noise bypass capacitor and with the option
for remote output capacitor placement.
PSRR: 75 dB at 1 kHz
Output voltage tolerance: ±2%
Low dropout: 120 mV (typical)
Very low IQ (enabled, no load): 12 µA
Low output-voltage noise: 12 µVRMS
Stable with ceramic input and output capacitors
Thermal overload protection
Short-circuit protection
Reverse current protection
Automatic output discharge for fast turnoff
The device contains a reverse current protection
circuit that prevents a reverse current flow through the
LDO to the IN pin when the input voltage is lower than
the output voltage.
2 Applications
When the Enable (EN) pin is low, and the output is
in an OFF state, an automatic output discharge circuit
discharges the output capacitance for fast turnoff.
•
•
•
•
•
•
•
Mobile phones and tablets
Digital cameras and audio devices
Portable and battery-powered equipment
Portable medical equipment
Virtual reality
With its low input and low output voltage range the
LP5910 is well-suited as a post DC-DC regulator
(post BUCK regulator) or for single- or dual-cell
applications.
RF, PLL, VCO, and clock power supplies
IP cameras
The device is designed to work with a 1-μF input and
a 1-μF output ceramic capacitor. A separate noise
bypass capacitor is not required.
This device is available with fixed output voltages
from 0.8 V to 2.3 V in 25-mV steps. Contact Texas
Instruments Sales for specific voltage option needs.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE
WSON (6)
2.00 mm × 2.00 mm (NOM)
LP5910
DSBGA (4) 0.742 mm × 0.742 mm (MAX)
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
VIN
VOUT
IN
OUT
CIN
COUT
LP5910
Enable
EN
GND
Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: LP5910
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
1