LP3995
www.ti.com
SNVS179E –FEBRUARY 2003–REVISED MARCH 2013
LP3995 Micropower 150mA CMOS Voltage Regulator with Active Shutdown
Check for Samples: LP3995
1
FEATURES
DESCRIPTION
The LP3995 linear regulator is designed to meet the
requirements of portable battery-powered applications
and will provide an accurate output voltage with low
noise and low quiescent current. Ideally suited for
powering RF/Analog devices, this device will also be
used to meet more general circuit needs in which a
fast turn-off is essential.
2
•
5 pin DSBGA Package
•
•
•
•
•
•
•
6 pin WSON Package
Stable With Ceramic Capacitor
Logic Controlled Enable
Fast Turn-On
Active Disable for Fast Turn-Off
Thermal-overload and Short-Circuit Protection
For battery powered applications the low dropout and
low ground current provided by the device allows the
lifetime of the battery to be maximized. The
Enable(/Disable) control allows the system to further
extend the battery lifetime by reducing the power
consumption to virtually zero.
−40 to +125°C Junction Temperature Range for
Operation
APPLICATIONS
The Enable(/Disable) function on the device
incorporates an active discharge circuit on the output
for faster device shutdown. Where the fast turn-off is
not required the LP3999 linear regulator is
recommended.
•
•
•
•
•
GSM Portable Phones
CDMA Cellular Handsets
Wideband CDMA Cellular Handsets
Bluetooth Devices
Portable Information Appliances
The LP3995 also features internal protection against
short-circuit
conditions.
currents
and
over-temperature
KEY SPECIFICATIONS
•
•
•
•
Input Range: 2.5V to 6.0V
The LP3995 is designed to be stable with small 1.0
µF ceramic capacitors. The small outline of the
LP3995 DSBGA package with the required ceramic
capacitors can realize a system application within
minimal board area.
Accurate Output Voltage: ±75mV / 2%
Typical Dropout with 150 mA Load: 60mV
Virtually Zero Quiescent Current when
Disabled
Performance is specified for a −40°C to +125°C
temperature range.
•
•
•
•
•
Low Output Voltage Noise
Stable with an Output Capacitor of 1µF
Output Current: 150mA
The device is available in DSBGA package and
WSON package. For other package options contact
your local TI sales office.
Fast Turn-on: 30µs (Typ.)
Fast Turn-off: 175µs (Typ.)
The device is available in fixed output voltages in the
ranges 1.5V to 3.3V. For availability, please contact
your local TI sales office.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2013, Texas Instruments Incorporated