LP3990
www.ti.com
SNVS251I –MAY 2004–REVISED MAY 2013
LP3990 150mA Linear Voltage Regulator for Digital Applications
Check for Samples: LP3990
1
FEATURES
APPLICATIONS
2
•
•
•
•
•
1% Voltage Accuracy at Room Temperature
Stable with Ceramic Capacitor
•
•
Cellular Handsets
Hand-Held Information Appliances
Logic Controlled Enable
DESCRIPTION
No Noise Bypass Capacitor Required
Thermal-Overload and Short-Circuit Protection
The LP3990 regulator is designed to meet the
requirements of portable, battery-powered systems
providing an accurate output voltage, low noise, and
low quiescent current. The LP3990 will provide a
0.8V output from the low input voltage of 2V at up to
150mA load current. When switched into shutdown
mode via a logic signal at the enable pin, the power
consumption is reduced to virtually zero.
KEY SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Input Voltage Range, 2.0 to 6.0V
Output Voltage Range, 0.8 to 3.3V
Output Current, 150mA
Output Stable - Capacitors, 1.0µF
Virtually Zero IQ (Disabled), <10nA
Very Low IQ (Enabled), 43µA
Low Output Noise, 150µVRMS
PSRR, 55dB at 1kHz
The LP3990 is designed to be stable with space
saving ceramic capacitors as small as 1.0µF.
Performance is specified for a -40°C to 125°C
junction temperature range.
For output voltages other than 0.8V, 1.2, 1.35V, 1.5V,
1.8V, 2.5V, 2.8V, or 3.3V please contact your local
NSC sales office.
Fast Start Up, 105µs
PACKAGE
All available in Lead Free option.
•
•
•
4-Pin DSBGA, 1 mm x 1.3 mm
6-pin WQFN (SOT-23 Footprint)
SOT-23
For other package options contact your Texas Instruments sales
office.
Typical Application Circuit
LP3990
V
V
IN
IN
6
V
OUT
1.0 mF
V
OUT
1
1.0 mF
V
V
EN
EN
5
GND
2
(WQFN pin connections shown)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2013, Texas Instruments Incorporated