LP3985
www.ti.com
SNVS087AC –OCTOBER 2000–REVISED MAY 2013
LP3985 Micropower, 150mA Low-Noise Ultra Low-Dropout CMOS Voltage Regulator
Check for Samples: LP3985
1
FEATURES
DESCRIPTION
The LP3985 is designed for portable and wireless
applications with demanding performance and space
requirements.
2
•
Miniature 5-I/O DSBGA and USON Package
Logic Controlled Enable
•
•
Stable with Ceramic and High Quality
Tantalum Capacitors
The LP3985 is stable with a small 1µF ±30% ceramic
or high-quality tantalum output capacitor. The DSBGA
requires the smallest possible PC board area - the
total application circuit area can be less than 2.0mm x
2.5mm, a fraction of a 1206 case size.
•
•
Fast Turn-on
Thermal Shutdown and Short-Circuit Current
Limit
The LP3985's performance is optimized for battery
powered systems to deliver ultra low noise, extremely
low dropout voltage and low quiescent current.
Regulator ground current increases only slightly in
dropout, further prolonging the battery life.
APPLICATIONS
•
•
•
•
CDMA Cellular Handsets
Wideband CDMA Cellular Handsets
GSM Cellular Handsets
An optional external bypass capacitor reduces the
output noise without slowing down the load transient
response. Fast startup time is achieved by utilizing an
internal power-on circuit that actively pre-charges the
bypass capacitor.
Portable Information Appliances
KEY SPECIFICATIONS
•
•
•
•
•
•
•
2.5 to 6.0V Input Range
Power supply rejection is better than 50dB at low
frequencies and starts to roll off at 1kHz. High power
supply rejection is maintained down to low input
voltage levels common to battery operated circuits.
150mA Verified Output
50dB PSRR at 1kHz @ VIN = VOUT + 0.2V
≤1.5μA Quiescent Current when Shut Down
Fast Turn-On time: 200μs (typ.)
The device is ideal for mobile phone and similar
battery powered wireless applications. It provides up
to 150mA, from a 2.5V to 6V input. The LP3985
consumes less than 1.5µA in disable mode and has
fast turn-on time less than 200µs.
100mV Maximum Dropout with 150mA Load
30μVrms Output Noise (typ.) Over 10Hz to
100kHz
•
•
−40 to +125°C Junction Temperature Range for
Operation
2.5V, 2.6V, 2.7V, 2.8V, 2.85V, 2.9V, 3.0V, 3.1V,
3.2V, 3.3V, 4.7V, 4.75V, 4.8V and 5.0V outputs
standard
Typical Application Circuit
1(C3)
3(A1)
5(C1)
VIN
VOUT
LP3985
1mF
1mF
4(A3)
VEN
BYPASS
*
2(B2)
Pin Numbers in parenthesis indicate DSBGA package.
* Optional Noise Reduction Capacitor.
Figure 1.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2013, Texas Instruments Incorporated