Datasheet > LP3945ILDX

LP3945ILDX

更新时间： 2024-11-14 22:18:15

品牌	Logo	应用领域
美国国家半导体 - NSC		电池
页数	文件大小	规格书
15页	334K
描述
Battery Charge Management System

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

LP3945ILDX 数据手册

October 2003

LP3945/LP3946

Battery Charge Management System

General Description

Features

n Integrated pass transistor

The LP3945 and LP3946 are complete charge management

systems that safely charge and maintain a Li-Ion battery or a

four-cell Ni-MH (LP3945 only) battery pack. The LP3945

offers the flexibility of programming charge current, battery

regulation voltage (4.1V/4.2V), battery type (Li-Ion/Ni-MH),

and End Of Charge (EOC) termination through the use of I²C

interface. On the LP3946, these parameters are pro-

grammed at the factory per customer specification.

n Does not require external charge current setting or

sensing resistors

n I²C interface (LP3945 only) — programmable charge

current, EOC current and battery regulation voltage

n Near-depleted battery preconditioning

n Built-in 5.6 hour timer

n Under voltage and over voltage lockout on adaptor

n Charge status indicators

n Charge current monitor analog output

n LDO mode operation can source 1 amp

n Continuous over current/temperature protection

The pass transistor, charge current sensing resistor and

charge current setting resistors are all integrated inside the

LP3945 and LP3946. This eliminates the use of external

components and significantly reduces design time and board

space.

The LP3945 and LP3946 operate in four modes: pre-

qualification, constant current, constant voltage and mainte-

nance modes. The LP3945 features Ni-MH charging mode

as well. The charger has under-voltage and over-voltage

protection as well as an internal 5.6 hr timer to prevent

overcharging the battery. There are two open drain outputs

for status indication. An internal amplifier readily converts the

charge current into a voltage. Also, the charger can operate

in an LDO mode providing up to 1 Amp to the load.

Key Specifications

n 1% charger voltage accuracy over 0˚C ≤ T_J≤ 85˚C

n 4.5V to 6.0V input voltage range

n LLP package power dissipation: 2.7W at T_A= 25˚C

Applications

n Cellular phones

n PDAs

n Digital cameras

n USB powered devices

n Programmable current sources

Typical Application Circuit

20066502

20066501

DS200665

www.national.com

12 3 4 5 6 7...15

中文翻译

下载PDF

与LP3945ILDX相关器件

型号	品牌	获取价格	描述	数据表
LP3945LD	TI	获取价格	IC,BATTERY MANAGEMENT,LLCC,14PIN,PLASTIC
LP3945LDX	TI	获取价格	IC,BATTERY MANAGEMENT,LLCC,14PIN,PLASTIC
LP3945LDX	NSC	获取价格	IC,BATTERY MANAGEMENT,LLCC,14PIN,PLASTIC
LP3946	NSC	获取价格	Battery Charge Management System
LP3946ILDX	NSC	获取价格	Battery Charge Management System
LP3946LD	NSC	获取价格	IC,BATTERY MANAGEMENT,LLCC,14PIN,PLASTIC
LP3946LDX	TI	获取价格	IC,BATTERY MANAGEMENT,LLCC,14PIN,PLASTIC
LP3947	NSC	获取价格	USB/AC Adaptor, Single Cell Li-Ion Battery Charger IC
LP3947	TI	获取价格	USB/交流适配器，单节锂离子电池充电器 IC
LP3947ISD-09	TI	获取价格	1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO14, WSON-14