5秒后页面跳转
捷配首页

Datasheet > 电源电路 > 线性稳压器IC> LP3872ESX-3.3/NOPB
LP3872ESX-3.3/NOPB PDF预览

LP3872ESX-3.3/NOPB

更新时间： 2024-11-09 12:19:23
品牌 Logo 应用领域
德州仪器 - TI 线性稳压器IC调节器电源电路输出元件
页数 文件大小 规格书
25页 2750K
描述
LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators

阅读下载

中文翻译

获取价格

LP3872ESX-3.3/NOPB 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Active零件包装代码：D2PAK
包装说明：TO-263, SMSIP5H,.6,67TB针数：4
Reach Compliance Code：not_compliantECCN代码：EAR99
HTS代码：8542.39.00.01Factory Lead Time：6 weeks
风险等级：0.72可调性：FIXED
最大回动电压 1：0.55 V标称回动电压 1：0.38 V
最大绝对输入电压：7.5 V最大输入电压：7 V
最小输入电压：3.85 VJESD-30 代码：R-PSSO-G5
JESD-609代码：e3长度：10.16 mm
湿度敏感等级：3功能数量：1
输出次数：1端子数量：5
工作温度TJ-Max：125 °C工作温度TJ-Min：-40 °C
最高工作温度：125 °C最低工作温度：-40 °C
最大输出电流 1：1.5 A最大输出电压 1：3.399 V
最小输出电压 1：3.201 V标称输出电压 1：3.3 V
封装主体材料：PLASTIC/EPOXY封装代码：TO-263
封装等效代码：SMSIP5H,.6,67TB封装形状：RECTANGULAR
封装形式：SMALL OUTLINE包装方法：TR
峰值回流温度（摄氏度）：245认证状态：Not Qualified
调节器类型：FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR座面最大高度：4.8 mm
子类别：Other Regulators表面贴装：YES
技术：CMOS端子面层：Matte Tin (Sn)
端子形式：GULL WING端子节距：1.7 mm
端子位置：SINGLE处于峰值回流温度下的最长时间：NOT SPECIFIED
最大电压容差：3%宽度：8.64 mm
Base Number Matches：1

LP3872ESX-3.3/NOPB 数据手册

 浏览型号LP3872ESX-3.3/NOPB的Datasheet PDF文件第2页浏览型号LP3872ESX-3.3/NOPB的Datasheet PDF文件第3页浏览型号LP3872ESX-3.3/NOPB的Datasheet PDF文件第4页浏览型号LP3872ESX-3.3/NOPB的Datasheet PDF文件第5页浏览型号LP3872ESX-3.3/NOPB的Datasheet PDF文件第6页浏览型号LP3872ESX-3.3/NOPB的Datasheet PDF文件第7页 
LP3872, LP3875  
www.ti.com  
SNVS227F –FEBRUARY 2003–REVISED APRIL 2013  
LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators  
Check for Samples: LP3872, LP3875  
1
FEATURES  
DESCRIPTION  
The LP3872/LP3875 series of fast ultra low-dropout  
linear regulators operate from a +2.5V to +7.0V input  
supply. Wide range of preset output voltage options  
are available. These ultra low dropout linear  
regulators respond very quickly to step changes in  
load, which makes them suitable for low voltage  
microprocessor applications. The LP3872/LP3875 are  
developed on a CMOS process which allows low  
quiescent current operation independent of output  
load current. This CMOS process also allows the  
LP3872/LP3875 to operate under extremely low  
dropout conditions.  
2
•
•
•
•
•
•
Ultra Low Dropout Voltage  
Low Ground Pin Current  
Load Regulation of 0.06%  
10nA Quiescent Current in Shutdown Mode  
Ensured Output Current of 1.5A DC  
Available in DDPAK/TO-263, TO-220 and  
SOT-223 Packages  
•
•
•
•
•
•
Output Voltage Accuracy ± 1.5%  
Error Flag Indicates Output Status  
Sense Option Improves Load Regulation  
Minimum Output Capacitor Requirements  
Overtemperature/Overcurrent Protection  
−40°C to +125°C Junction Temperature Range  
Dropout Voltage: Ultra low dropout voltage; typically  
38mV at 150mA load current and 380mV at 1.5A load  
current.  
Ground Pin Current: Typically 6mA at 1.5A load  
current.  
APPLICATIONS  
Shutdown Mode: Typically 10nA quiescent current  
when the shutdown pin is pulled low.  
•
•
•
•
•
•
•
•
Microprocessor Power Supplies  
GTL, GTL+, BTL, and SSTL Bus Terminators  
Power Supplies for DSPs  
SCSI Terminator  
Error Flag: Error flag goes low when the output  
voltage drops 10% below nominal value.  
SENSE: Sense pin improves regulation at remote  
loads.  
Post Regulators  
High Efficiency Linear Regulators  
Battery Chargers  
Precision Output Voltage: Multiple output voltage  
options are available ranging from 1.8V to 5.0V with a  
specified accuracy of ±1.5% at room temperature,  
and ±3.0% over all conditions (varying line, load, and  
temperature).  
Other Battery Powered Applications  
TYPICAL APPLICATION CIRCUITS  
*SD and ERROR pins must be pulled high through a 10kΩ pull-up resistor. Connect the ERROR pin to ground if this  
function is not used. See application hints for more information.  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
All trademarks are the property of their respective owners.  
2
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2003–2013, Texas Instruments Incorporated  
1234567...25

中文翻译

下载PDF

LP3872ESX-3.3/NOPB 替代型号

型号 品牌 替代类型 描述 数据表
LP3872ES-3.3/NOPB TI

类似代替

 LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators
LP3872ES-3.3 TI

类似代替

 LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators

与LP3872ESX-3.3/NOPB相关器件

型号 品牌 获取价格 描述 数据表
LP3872ESX-5.0 NSC

获取价格

 		1.5A Fast Ultra Low Dropout Linear Regulators
LP3872ESX-5.0/NOPB TI

获取价格

 		LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators
LP3872ET-1.8 NSC

获取价格

 		1.5A Fast Ultra Low Dropout Linear Regulators
LP3872ET-2.5 NSC

获取价格

 		1.5A Fast Ultra Low Dropout Linear Regulators
LP3872ET-3.3 NSC

获取价格

 		1.5A Fast Ultra Low Dropout Linear Regulators
LP3872ET-3.3/NOPB TI

获取价格

 		3.3V FIXED POSITIVE LDO REGULATOR, 0.55V DROPOUT, PSFM5, TO-220, 5 PIN
LP3872ET-5.0 NSC

获取价格

 		1.5A Fast Ultra Low Dropout Linear Regulators
LP3873 NSC

获取价格

 		3A Fast Ultra Low Dropout Linear Regulators
LP3873 TI

获取价格

 		3A Fast Ultra Low Dropout Linear Regulators
LP3873_06 NSC

获取价格

 		3A Fast Ultra Low Dropout Linear Regulators

与LP3872ESX-3.3/NOPB相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证