Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LP2982
SNVS128K –MARCH 2000–REVISED JUNE 2016
LP2982 50-mA Micropower Ultra-Low-Dropout LDO in SOT-23 Package
1 Features
3 Description
The LP2982 is a 50-mA, fixed-output voltage LDO
designed to provide ultra-low dropout and lower noise
in battery-powered applications.
1
•
2.1-V to 16-V Input Voltage
•
•
•
•
•
•
•
•
•
•
•
•
Ultra-Low-Dropout Voltage
Ensured 50-mA Output Current
Using an optimized vertically integrated PNP (VIP)
process, the LP2982 delivers unequaled performance
in all specifications critical to battery-powered
designs:
Typical Dropout Voltage 180 mV at 80 mA
Requires Minimum External Components
< 1 μA Quiescent Current When Shut Down
Low Ground Pin Current at All Loads
Output Voltage Accuracy 1% (A Grade)
High Peak Current Capability (150 mA Typical)
Wide Supply Voltage Range (16 V Maximum)
Low ZOUT 0.3 Ω Typical (10 Hz to 1 MHz)
Overtemperature and Overcurrent Protection
−40°C to +125°C Junction Temperature Range
Dropout Voltage: Typically 120 mV at 50 mA load,
and 7 mV at 1 mA load.
Ground Pin Current: Typically 375 μA at 50 mA load,
and 80 μA at 1 mA load.
Sleep Mode: Less than 1-μA quiescent current when
ON/OFF pin is pulled low.
Precision Output: 1% tolerance output voltages
available (A grade).
2 Applications
Low Noise: By adding an external bypass capacitor,
output noise can be reduced to 30 μV (typical).
•
•
•
•
Cellular Phones
Palmtop and Laptop Computers
Personal Digital Assistants (PDA)
Camcorders, Personal Stereos, Cameras
Device Information(1)
PART NUMBER
LP2982
PACKAGE
BODY SIZE (NOM)
SOT-23 (5)
2.90 mm × 1.60 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Schematic
IN
OUT
V
V
OUT
IN
C
C
OUT
IN
ON/OFF
ON/OFF BYPASS
GND
hb
hCC
C
BYPASS
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.