LP2954, LP2954A
www.ti.com
SNVS096D –JUNE 1999–REVISED MARCH 2013
LP2954/LP2954A 5V and Adjustable Micropower Low-Dropout Voltage Regulators
Check for Samples: LP2954, LP2954A
1
FEATURES
DESCRIPTION
The LP2954 is a 5V micropower voltage regulator
with very low quiescent current (90 μA typical at 1 mA
load) and very low dropout voltage (typically 60 mV at
light loads and 470 mV at 250 mA load current).
2
•
5V Output within 1.2% Over Temperature
(A Grade)
•
Adjustable 1.23 to 29V Output Voltage
Available (LP2954IM and LP2954AIM)
The quiescent current increases only slightly at
dropout (120 μA typical), which prolongs battery life.
•
•
•
•
•
•
•
•
Ensured 250 mA Output Current
Extremely Low Quiescent Current
Low Dropout Voltage
The LP2954 with a fixed 5V output is available in the
three-lead TO-220 and DDPAK/TO-263 packages.
The adjustable LP2954 is provided in an 8-lead
surface mount, small outline package. The adjustable
version also provides a resistor network which can be
pin strapped to set the output to 5V.
Reverse Battery Protection
Extremely Tight Line and Load Regulation
Very Low Temperature Coefficient
Current and Thermal Limiting
Reverse battery protection is provided.
Pin Compatible with LM2940 and LM340
(5V Version Only)
The tight line and load regulation (0.04% typical), as
well as very low output temperature coefficient make
the LP2954 well suited for use as a low-power
voltage reference.
•
Adjustable Version Adds Error Flag to Warn of
Output Drop and a Logic-Controlled Shutdown
Output accuracy is ensured at both room temperature
and over the entire operating temperature range.
APPLICATIONS
•
•
High-Efficiency Linear Regulator
Low Dropout Battery-Powered Regulator
Package Outline and Ordering Information
Figure 1. TO-220 3–Lead Plastic Package (Front
View)
Figure 2. SO-8 Small Outline Surface Mount (Top
View)
Figure 3. TO-263 3-Lead Plastic Surface-Mount
Package (Top View)
Figure 4. TO-263 3-Lead Plastic Surface-Mount
Package (Side View)
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated