LMTOW78_0.5 series
Wide input, non-isolated & regulated, single output, SMD package
Switching Regulator
Short circuit protection (SCP)
SMD package, full SMD
technology
Efficiency up to 92%
High voltage input range, up
to 72V
Remote ON/OFF control
Operating ambient tempe-
rature range: -40°C ~ +105°C
Excellent line/load regulation
RoHS compliance
The LMTOW78_0.5 series are high efficiency switching regulators. The
converters feature high efficiency, low loss and short-circuit protection
in a compact SMD package. These products are widely used in applica-
tions such as industrial control, instrumentation and electric power.
Common specifications
Cooling:
Output specifications
Nature convection
Item
Test conditions
Min
Typ
Max
2
Units
%
Short circuit protection:
Operating temperature range:
Continuous, automatic recovery
Voltage accuracy
-40°C ~ +105°C
-40°C ~ +60°C (for 100% load)
Voltage
adjustability
input voltage range
10
%
Storage temperature range:
Reflow soldering temperature:
-55°C ~ +125°C
Line regulation
Load regulation
Ripple + Noise*
1
1
%
260°C, MAX
%
Peak temp. ≤245°C, maximum duration
time ≤10s. For actual application, please
refer to IPC/JEDEC J-STD-020D.1.
20MHz bandwidth
75
mVpk-pk
%/°C
Temperature
coefficient
0.02
Storage humidity range:
Safety standard:
< 95%
Transient recovery Normal Vin, 25% load
time step change
250
µs
IEC/EN 60950-1, 62368-1
Plastic [UL94-V0]
> 4,800,000 hours
1.8g
Case material:
Transient response Normal Vin, 25% load
deviation
3
%
MTBF (MIL-HDBK-217F,+25°C):
Package weight:
step change
Switching
frequency
150~550
KHz
Dimensions:
1.96 x 1.19 x 0.50mm
*
Measured with a 0.1µF ceramic capacitor & 10µF electrolytic capacitor.
Input specifications
EMC specifications
Item
Test conditions
Min Typ
10
Max
Units
ms
EMI
CE*
CISPR32/EN55032
CISPR32/EN55032
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
IEC/EN61000-4-8
CLASS B
Start up time
nominal Vin and con-
stant resistive load
EMI
RE*
CLASS B
EMS
EMS
EMS
EMS
EMS
EMS
ESD
perf. Criteria A
perf. Criteria A
perf. Criteria A
perf. Criteria A
perf. Criteria A
perf. Criteria A
Input filter
Capacitors
RS
Input reflected
ripple current*
35
mApk-pk
VDC
EFT**
Surge**
CS
Surge voltage
100ms
75
Remote ON/OFF
CTRL*
• ON
• OFF
• OFF Idle current
open circuit
short circuit CTRL (pin 10) and
GND
PFMF
1
mA
*
The series can meet EN55032 Class B with an external filter in parallel with
the input pins.
** An external filter is required if the module has to meet IEC61000-4-4 &
IEC61000-4-5.
*
Measured through a source indicator L1 (12µH) and a source capacitor C1=10µF
at nominal input and full load.
** The remote ON/OFF pin is referenced to GND.
Note:
Example:
1. All specifications measured at Ta = 25°C, humidity <75%, nominal input voltage
and rated output load unless otherwise specified.
LMTOW78_05-0.5
LM = Series; T = SMT case; O = Open frame; W = Wide input;
05 = 5Vout; 0.5 = 0.5A
2. In this datasheet, all the test methods of indications are based on corporate
standards.
Page 1 of 4
LMTOW78_0.5 – Rev. 2020-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com