Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
LMP8480-Q1, LMP8481-Q1
SNVSAL6A –JULY 2016–REVISED FEBRUARY 2017
LMP848x-Q1 Automotive, 76-V, High-Side, High-Speed, Current-Sense Amplifier
1 Features
3 Description
The
LMP8481-Q1 devices are precision, high-side,
current-sense amplifiers that amplify small
automotive-qualified
LMP8480-Q1
and
1
•
Qualified for Automotive Applications
•
AEC-Q100 Qualified With the Following Results:
a
–
Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature
differential voltage developed across a current-sense
resistor in the presence of high input common-mode
voltages. These amplifiers are designed for
–
–
Device HBM ESD Classification Level 2
Device CDM ESD Classification Level C6
bidirectional
(LMP8481-Q1)
or
unidirectional
(LMP8480-Q1) current applications and accept input
signals with a common-mode voltage range from 4 V
to 76 V with a bandwidth of 270 kHz. Because the
operating power-supply range overlaps the input
common-mode voltage range, the LMP848x-Q1 can
be powered by the same voltage that is being
monitored. This benefit eliminates the need for an
intermediate supply voltage to be routed to the point
of load where the current is being monitored,
resulting in reduced component count and board
space.
•
•
•
•
•
•
•
•
•
•
•
•
Bidirectional or Unidirectional Sensing
Common Mode Voltage Range: 4.0 V to 76 V
Supply Voltage Range: 4.5 V to 76 V
Fixed Gains: 20, 60, and 100 V/V
Gain Accuracy: ±0.1%
Offset: ±80 µV
Bandwidth (–3 dB): 270 kHz
Quiescent Current: < 100 µA
Buffered High-Current Output: > 5 mA
Input Bias Current: 7 µA
The LMP848x-Q1 family consists of fixed gains of 20,
60, and 100 for applications that demand high
accuracy over temperature. The low-input offset
voltage allows the use of smaller sense resistors
without sacrificing system error. The LMP8480-Q1
and LMP8481-Q1 are pin-for-pin replacements for the
MAX4080 and MAX4081 devices, offering improved
offset voltage, wider reference adjust range, and
higher output drive capabilities. The LMP8480-Q1
and LMP8481-Q1 are available in an 8-pin VSSOP
package.
PSRR (DC): 122 dB
CMRR (DC): 124 dB
2 Applications
•
•
•
•
Body Control Modules
Powertrain
Battery Management
Inverters
Device Information(1)
PART NUMBER
LMP8480-Q1
PACKAGE
VSSOP (8)
VSSOP (8)
BODY SIZE (NOM)
3.00 mm x 3.00 mm
3.00 mm x 3.00 mm
LMP8481-Q1
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application Schematic
ISENSE
V
CC
= +4.5V to +76V
To Load
C1
RSENSE
0.1 µF
RSP
GND
LMP8481-Q1
REFA
V
OUT
VSENSE
VIN+
REFB
RSN
ADC
VREF
VIN-
LM4140ACM-1.2
C2
0.1 µF
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.