LMP7717, LMP7718
www.ti.com
SNOSAY7H –MARCH 2007–REVISED MARCH 2013
88 MHz, Precision, Low Noise, 1.8V CMOS Input, Decompensated Operational Amplifier
Check for Samples: LMP7717, LMP7718
1
FEATURES
DESCRIPTION
The LMP7717 (single) and the LMP7718 (dual) low
noise, CMOS input operational amplifiers offer a low
input voltage noise density of 5.8 nV/√Hz while
consuming only 1.15 mA (LMP7717) of quiescent
current. The LMP7717/LMP7718 are stable at a gain
of 10 and have a gain bandwidth (GBW) product of
88 MHz. The LMP7717/LMP7718 have a supply
voltage range of 1.8V to 5.5V and can operate from a
single supply. The LMP7717/LMP7718 each feature a
rail-to-rail output stage. Both amplifiers are part of the
LMP™ precision amplifier family and are ideal for a
variety of instrumentation applications.
23
•
(Typical 5V Supply, Unless Otherwise Noted)
Input Offset Voltage: ±150 µV (max)
Input Referred Voltage Noise: 5.8 nV/√Hz
Input Bias Current: 100 fA
•
•
•
•
•
•
Gain Bandwidth Product: 88 MHz
Supply Voltage Range: 1.8V to 5.5V
Supply Current Per Channel
–
–
LMP7717: 1.15 mA
LMP7718: 1.30 mA
•
Rail-to-Rail Output Swing
The LMP7717 family provides optimal performance in
low voltage and low noise systems. A CMOS input
stage, with typical input bias currents in the range of
a few femto-Amperes, and an input common mode
voltage range, which includes ground, make the
LMP7717/LMP7718 ideal for low power sensor
applications where high speeds are needed.
–
–
@ 10 kΩ Load: 25 mV from Rail
@ 2 kΩ Load: 45 mV from Rail
•
•
Ensured 2.5V and 5.0V Performance
Total Harmonic Distortion: 0.04% @1 kHz,
600Ω
•
Temperature Range: −40°C to 125°C
The LMP7717/LMP7718 are manufactured using TI’s
advanced VIP50 process. The LMP7717 is offered in
either a 5-Pin SOT-23 or an 8-Pin SOIC package.
The LMP7718 is offered in either the 8-Pin SOIC or
the 8-Pin VSSOP.
APPLICATIONS
•
•
•
•
•
•
ADC Interface
Photodiode Amplifiers
Active Filters and Buffers
Low Noise Signal Processing
Medical Instrumentation
Sensor Interface Applications
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
LMP is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated