LMP7711
www.ti.com
SNOSAP4F –SEPTEMBER 2005–REVISED MAY 2013
Single and Dual Precision, 17 MHz, Low Noise, CMOS Input Amplifiers
Check for Samples: LMP7711
1
FEATURES
DESCRIPTION
The LMP7711/LMP7712 are single and dual low
noise, low offset, CMOS input, rail-to-rail output
precision amplifiers with a high gain bandwidth
product and an enable pin. The LMP7711/LMP7712
are part of the LMP™ precision amplifier family and
are ideal for a variety of instrumentation applications.
23
•
Unless Otherwise Noted, Typical Values at VS
= 5V.
•
Input Offset Voltage ±150 μV (Max)
Input Bias Current 100 fA
•
•
•
•
•
•
•
•
•
•
•
Input Voltage Noise 5.8 nV/√Hz
Gain Bandwidth Product 17 MHz
Supply Current (LMP7711) 1.15 mA
Supply Current (LMP7712) 1.30 mA
Supply Voltage Range 1.8V to 5.5V
THD+N @ f = 1 kHz 0.001%
Utilizing a CMOS input stage, the LMP7711/LMP7712
achieve an input bias current of 100 fA, an input
referred voltage noise of 5.8 nV/√Hz, and an input
offset voltage of less than ±150 μV. These features
make the LMP7711/LMP7712 superior choices for
precision applications.
Consuming only 1.15 mA of supply current, the
LMP7711 offers a high gain bandwidth product of 17
MHz, enabling accurate amplification at high closed
loop gains.
Operating Temperature Range −40°C to 125°C
Rail-to-rail Output Swing
Space Saving SOT Package (LMP7711)
10-pin VSSOP Package (LMP7712)
The LMP7711/LMP7712 have a supply voltage range
of 1.8V to 5.5V, which makes these ideal choices for
portable low power applications with low supply
voltage requirements. In order to reduce the already
low power consumption the LMP7711/LMP7712 have
an enable function. Once in shutdown, the
LMP7711/LMP7712 draw only 140 nA of supply
current.
APPLICATIONS
•
•
•
Active Filters and Buffers
Sensor Interface Applications
Transimpedance Amplifiers
The LMP7711/LMP7712 are built with TI's advanced
VIP50 process technology. The LMP7711 is offered
in a 6-pin SOT package and the LMP7712 is offered
in a 10-pin VSSOP.
TYPICAL PERFORMANCE
Offset Voltage Distribution
Input Referred Voltage Noise
100
25
V
V
= 5V
S
V = 5.5V
S
= V /2
S
CM
20 UNITS TESTED: 10,000
V
= 2.5V
S
15
10
5
10
1
0
-200
1k
1
10
100
10k
100k
-100
0
100
200
FREQUENCY (Hz)
OFFSET VOLTAGE (mV)
Figure 1.
Figure 2.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LMP is a trademark of Texas Instruments.
2
3
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated