5秒后页面跳转
捷配首页

Datasheet > LM75BGD,125
LM75BGD,125 PDF预览

LM75BGD,125

更新时间： 2024-11-23 19:16:43
品牌 Logo 应用领域
恩智浦 - NXP 输出元件传感器换能器
页数 文件大小 规格书
36页 495K
描述
LM75B - Digital temperature sensor and thermal watchdog SON 8-Pin

阅读下载

中文翻译

获取价格

LM75BGD,125 技术参数

是否Rohs认证： 符合生命周期：Active
零件包装代码：SON包装说明：3 X 2 MM, 0.50 MM HEIGHT, PLASTIC, XSON-8
针数：8Reach Compliance Code：compliant
HTS代码：8542.39.00.01风险等级：1.73
最大精度（摄氏度）：3 Cel主体宽度：2 mm
主体高度：0.5 mm主体长度或直径：3 mm
外壳：PLASTIC安装特点：SURFACE MOUNT
位数：11端子数量：8
最大工作电流：0.3 mA最高工作温度：125 °C
最低工作温度：-55 °C输出接口类型：2-WIRE INTERFACE
封装主体材料：PLASTIC/EPOXY封装等效代码：SOLCC8,.12,20
封装形状/形式：RECTANGULAR电源：3/5 V
传感器/换能器类型：TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL子类别：Other Sensors
最大供电电压：5.5 V最小供电电压：2.8 V
表面贴装：YES端接类型：SOLDER
Base Number Matches：1

LM75BGD,125 数据手册

 浏览型号LM75BGD,125的Datasheet PDF文件第2页浏览型号LM75BGD,125的Datasheet PDF文件第3页浏览型号LM75BGD,125的Datasheet PDF文件第4页浏览型号LM75BGD,125的Datasheet PDF文件第5页浏览型号LM75BGD,125的Datasheet PDF文件第6页浏览型号LM75BGD,125的Datasheet PDF文件第7页 
LM75B  
Digital temperature sensor and thermal watchdog  
Rev. 4 — 7 February 2013  
Product data sheet  
1. General description  
The LM75B is a temperature-to-digital converter using an on-chip band gap temperature  
sensor and Sigma-Delta A-to-D conversion technique with an overtemperature detection  
output. The LM75B contains a number of data registers: Configuration register (Conf) to  
store the device settings such as device operation mode, OS operation mode, OS polarity  
and OS fault queue as described in Section 7 “Functional description”; temperature  
register (Temp) to store the digital temp reading, and set-point registers (Tos and Thyst) to  
store programmable overtemperature shutdown and hysteresis limits, that can be  
communicated by a controller via the 2-wire serial I2C-bus interface. The device also  
includes an open-drain output (OS) which becomes active when the temperature exceeds  
the programmed limits. There are three selectable logic address pins so that eight devices  
can be connected on the same bus without address conflict.  
The LM75B can be configured for different operation conditions. It can be set in normal  
mode to periodically monitor the ambient temperature, or in shutdown mode to minimize  
power consumption. The OS output operates in either of two selectable modes:  
OS comparator mode or OS interrupt mode. Its active state can be selected as either  
HIGH or LOW. The fault queue that defines the number of consecutive faults in order to  
activate the OS output is programmable as well as the set-point limits.  
The temperature register always stores an 11-bit two’s complement data giving a  
temperature resolution of 0.125 C. This high temperature resolution is particularly useful  
in applications of measuring precisely the thermal drift or runaway. When the LM75B is  
accessed the conversion in process is not interrupted (that is, the I2C-bus section is totally  
independent of the Sigma-Delta converter section) and accessing the LM75B  
continuously without waiting at least one conversion time between communications will  
not prevent the device from updating the Temp register with a new conversion result. The  
new conversion result will be available immediately after the Temp register is updated.  
The LM75B powers up in the normal operation mode with the OS in comparator mode,  
temperature threshold of 80 C and hysteresis of 75 C, so that it can be used as a  
stand-alone thermostat with those pre-defined temperature set points.  
2. Features and benefits  
Pin-for-pin replacement for industry standard LM75 and LM75A and offers improved  
temperature resolution of 0.125 C and specification of a single part over power supply  
range from 2.8 V to 5.5 V  
I2C-bus interface with up to 8 devices on the same bus  
Power supply range from 2.8 V to 5.5 V  
Temperatures range from 55 C to +125 C  
 
 
1234567...36

中文翻译

下载PDF

与LM75BGD,125相关器件

型号 品牌 获取价格 描述 数据表
LM75BIM-3 NSC

获取价格

 		Digital Temperature Sensor and Thermal WATCHDOG? with Two-Wire Interface
LM75BIM-3 TI

获取价格

 		LM75C Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
LM75BIM-3/NOPB TI

获取价格

 		LM75C Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
LM75BIM-3+ MAXIM

获取价格

 		Digital Temperature Sensor and Thermal Watchdog with 2-Wire Interface
LM75BIM-3+T MAXIM

获取价格

 		Temperature Sensor, CMOS, Rectangular, 8 Pin, Surface Mount
LM75BIM-5 TI

获取价格

 		LM75C Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
LM75BIM-5 NSC

获取价格

 		Digital Temperature Sensor and Thermal WATCHDOG? with Two-Wire Interface
LM75BIM-5/NOPB TI

获取价格

 		LM75C Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
LM75BIM-5+ MAXIM

获取价格

 		Digital Temperature Sensor and Thermal Watchdog with 2-Wire Interface
LM75BIMM-3 TI

获取价格

 		LM75C Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface

与LM75BGD,125相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证