LM5576, LM5576-Q1
www.ti.com
SNVS447I –JANUARY 2007–REVISED APRIL 2013
LM5576/LM5576-Q1 SIMPLE SWITCHER® 75V, 3A Step-Down Switching Regulator
Check for Samples: LM5576, LM5576-Q1
1
FEATURES
DESCRIPTION
The LM5576 is an easy to use SIMPLE SWITCHER®
buck regulator which allows design engineers to
design and optimize a robust power supply using a
minimum set of components. Operating with an input
voltage range of 6 - 75V, the LM5576 delivers 3A of
continuous output current with an integrated 170mΩ
N-Channel MOSFET. The regulator utilizes an
Emulated Current Mode architecture which provides
inherent line regulation, tight load transient response,
and ease of loop compensation without the usual
limitation of low-duty cycles associated with current
mode regulators. The operating frequency is
adjustable from 50kHz to 500kHz to allow
optimization of size and efficiency. To reduce EMI, a
frequency synchronization pin allows multiple IC’s
from the LM(2)557x family to self-synchronize or to
synchronize to an external clock. The LM5576
ensures robustness with cycle-by-cycle current limit,
short-circuit protection, thermal shut-down, and
remote shut-down. The device is available in a power
enhanced HTSSOP-20 package featuring an
exposed die attach pad for thermal dissipation. The
LM5576 is supported by the full suite of WEBENCH®
On-Line design tools.
23
•
LM5576-Q1 is an Automotive Grade Product
that is AEC-Q100 grade 1 Qualified (−40°C to +
125°C Operating Junction Temperature)
•
•
•
•
•
Integrated 75V, 170mΩ N-channel MOSFET
Ultra-Wide Input Voltage Range from 6V to 75V
Adjustable Output Voltage as Low as 1.225V
1.5% Feedback Reference Accuracy
Operating Frequency Adjustable Between
50kHz and 500kHz with Single Resistor
•
•
•
•
•
•
Master or Slave Frequency Synchronization
Adjustable Soft-Start
Emulated Current Mode Control Architecture
Wide Bandwidth Error Amplifier
Built-in Protection
Automotive Grade Product Datasheet that is
AEC-Q100 Grade 0 Qualified is Available Upon
Request.
–
(−40°C to + 150°C Operating Junction
Temperature)
APPLICATIONS
PACKAGE
•
•
Automotive
Industrial
•
HTSSOP-20EP (Exposed Pad)
Simplified Application Schematic
VIN
BST
SW
VIN
VOUT
SYNC
LM5576
SD
IS
OUT
FB
RT
VCC
SS
COMP
GND
RAMP
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
WEBENCH is a registered trademark of Texas Instruments.
2
3
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated