LM5088, LM5088-Q1
www.ti.com
SNVS600H –DECEMBER 2008–REVISED MARCH 2013
LM5088, LM5088-Q1 Wide Input Range Non-Synchronous Buck Controller
Check for Samples: LM5088, LM5088-Q1
1
FEATURES
DESCRIPTION
The LM5088 high voltage non-synchronous buck
2
•
LM5088-Q1 is an Automotive Grade Product
that is AEC-Q100 Grade 1 Qualified (-40°C to
+125°C Operating Junction Temperature)
controller features all the necessary functions to
implement an efficient high voltage buck converter
using a minimum number of external components.
The LM5088 can be configured to operate over an
ultra-wide input voltage range of 4.5V to 75V. This
easy to use controller includes a level shifted gate
driver capable of controlling an external N-channel
buck switch. The control method is based upon peak
current mode control utilizing an emulated current
ramp. The use of an emulated control ramp reduces
noise sensitivity of the pulse-width modulation circuit,
allowing reliable control of very small duty cycles
necessary in high input voltage/low output voltage
applications. The LM5088 switching frequency is
programmable from 50 kHz to 1 MHz.
•
•
•
Emulated Current Mode Control
Drives External High-Side N-channel MOSFET
Ultra-Wide Input Voltage Range from 4.5V to
75V
•
•
Low IQ Shutdown and Standby Modes
High Duty Cycle Ratio Feature for Reduced
Dropout Voltage
•
•
Spread Spectrum EMI Reduction (LM5088-1)
Hiccup Timer for Overload Protection
(LM5088-2)
•
Adjustable Output Voltage from 1.205V with
1.5% Feedback Reference Accuracy
The LM5088 is available in two versions: The
LM5088-1 provides a +/-5% frequency dithering
function to reduce the conducted and radiated EMI,
while the LM5088-2 provides a versatile restart timer
for overload protection. Additional features include a
low dropout bias regulator, tri-level enable input to
control shutdown and standby modes, soft-start and
oscillator synchronization capability. The device is
available in a thermally enhanced HTSSOP-16 pin
package.
•
•
•
•
•
•
Wide Bandwidth Error Amplifier
Single Resistor Oscillator Frequency Setting
Oscillator Synchronization Capability
Programmable Soft-Start
High Voltage, Low Dropout Bias Regulator
Thermal Shutdown Protection
PACKAGE
•
HTSSOP-16
Simplified Application Schematic
VIN (4.5V-75V)
RUV2
VIN
CBOOT
BOOT
EN
Q
CIN
RUV1
HG
SW
L
VOUT
DITH/RES
CDITHER/RESTART
RFB2
RFB1
D
COUT1
COUT2
CS
VCC
LM5088
RRAMP
CRAMP
CSS
Rs
CVCC
CSG
OUT
RAMP
SS
RT/SYNC
FB
RRT
CCOMP
RCOMP
GND
COMP
CHF
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated