Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM5021-Q1
SNVSA90 –DECEMBER 2014
LM5021-Q1 AC-DC Current-Mode PWM Controller
1 Features
2 Applications
1
•
•
Qualified for Automotive Applications
•
•
•
•
•
DCM/CCM Flyback Converters
AEC-Q100 Qualified With the Following Results:
Industrial Power Conversion
SMPS for Smart Meters and Audio Amplifiers
Building Automation and White Goods SMPS
Isolated Telecom Power Supplies
–
Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range
–
–
Device HBM Classification Level 2: ±2 kV
Device CDM Classification Level C4B: 750 V
3 Description
•
•
•
•
•
•
•
•
•
Ultra-low Startup Current (25 µA Maximum)
Current Mode Control
The LM5021 off-line pulse width modulation (PWM)
controller contains all of the features needed to
implement highly efficient off-line single-ended
flyback and forward power converters using current-
mode control. The LM5021 features include an ultra-
low (25 µA) start-up current, which minimizes power
losses in the high voltage start-up network. A skip
cycle mode reduces power consumption with light
loads for energy conserving applications (ENERGY
STAR®, CECP, and so forth). Additional features
include under-voltage lockout, cycle-by-cycle current
limit, hiccup mode overload protection, slope
Skip Cycle Mode for Low Standby Power
Single Resistor Programmable Oscillator
Synchronizable Oscillator
Adjustable Soft-Start
Integrated 0.7-A Peak Gate Driver
Direct Opto-Coupler Interface
Maximum Duty Cycle Limiting (80% for LM5021-1
or 50% for LM5021-2)
•
•
•
•
•
•
Slope Compensation (LM5021-1 Only)
Undervoltage Lockout (UVLO) with Hysteresis
Cycle-by-Cycle Overcurrent Protection
Hiccup Mode for Continuous Overload Protection
Leading Edge Blanking of Current Sense Signal
Package: VSSOP-8
compensation,
soft-start
and
oscillator
synchronization capability. This high performance 8-
pin IC has total propagation delays less than 100 ns
and a 1-MHz capable oscillator that is programmed
with a single resistor.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
LM5021-Q1
VSSOP (8)
3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Application Diagram
VOUT
+
AC
90 ~ 264 Vac
VCC
LM5021
VIN
RT
SS
OUT
CS
+
COMP GND
FEEDBACK
WITH
ISOLATION
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.