LM3674
www.ti.com
SNVS405F –DECEMBER 2005–REVISED MAY 2013
LM3674 2MHz, 600mA Step-Down DC-DC Converter in SOT-23
Check for Samples: LM3674
1
FEATURES
DESCRIPTION
The LM3674 step-down DC-DC converter is
optimized for powering low voltage circuits from a
single Li-Ion cell battery and input voltage rails from
2.7V to 5.5V. It provides up to 600mA load current,
over the entire input voltage range. There are several
fixed output voltages and adjustable output voltage
versions.
2
•
•
•
600mA Max Load Current
Input Voltage Range from 2.7V to 5.5V
Available in Fixed and Adjustable Output
Voltages Ranging from 1.0V to 3.3V
•
•
Operates from a Single Li-Ion Cell Battery
Internal Synchronous Rectification for High
Efficiency
The device offers superior features and performance
for mobile phones and similar portable systems.
During PWM mode, the device operates at a fixed-
frequency of 2 MHz (typ). Internal synchronous
rectification provides high efficiency during Pulse
Width Modulation (PWM) mode operation. In
shutdown mode, the device turns off and reduces
battery consumption to 0.01 µA (typ).
•
•
•
•
•
Internal Soft Start
0.01 µA Typical Shutdown Current
2 MHz PWM Fixed Switching Frequency (typ)
5-Pin SOT-23 Package
Current Overload Protection and Thermal
Shutdown Protection
The LM3674 is available in a 5-pin SOT-23 package
in leaded (PB) and lead-free (NO PB) versions. A
high switching frequency of 2 MHz (typ) allows use of
only three tiny external surface-mount components,
an inductor and two ceramic capacitors.
APPLICATIONS
•
•
•
•
•
•
•
Mobile Phones
PDAs
MP3 Players
Portable Instruments
W-LAN
Digital Still Cameras
Portable Hard Disk Drives
TYPICAL APPLICATION CIRCUITS
V
IN
L1:2.2 mH
V
OUT
2.7V to 5.5V
V
IN
SW
1
2
5
C
OUT
C
IN
LM3674
10 mF
4.7 mF
GND
EN
FB
4
3
Figure 1. Typical Application Circuit
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated