LM3671
LM3671Q
www.ti.com
SNVS294Q –NOVEMBER 2004–REVISED NOVEMBER 2013
LM3671, LM3671Q 2MHz, 600mA Step-Down DC-DC Converter
Check for Samples: LM3671, LM3671Q
1
FEATURES
APPLICATIONS
2
•
•
•
•
•
16 µA Typical Quiescent Current
•
•
•
•
•
•
•
•
Mobile Phones
PDAs
600 mA Maximum Load Capability
2 MHz PWM Fixed Switching Frequency (typ.)
Automatic PFM/PWM Mode Switching
MP3 Players
W-LAN
Internal Synchronous Rectification for High
Efficiency
Portable Instruments
Digital Still Cameras
Portable Hard Disk Drives
Automotive
•
•
•
•
Internal Soft Start
0.01 µA Typical Shutdown Current
Operates from a Single Li-Ion Cell Battery
DESCRIPTION
Only Three Tiny Surface-Mount External
Components Required (One Inductor, Two
Ceramic Capacitors)
The LM3671 step-down DC-DC converter is
optimized for powering low voltage circuits from a
single Li-Ion cell battery and input voltage rails from
2.7V to 5.5V. It provides up to 600 mA load current,
over the entire input voltage range. There are several
different fixed voltage output options available as well
as an adjustable output voltage version range from
1.1V to 3.3V.
•
•
•
•
Current Overload and Thermal Shutdown
Protection
Available in Fixed Output Voltages and
Adjustable Version
LM3671Q is an Automotive Grade Product that
is AEC-Q100 Grade 1 Qualified
The device offers superior features and performance
for mobile phones and similar portable systems.
Automatic intelligent switching between PWM low-
noise and PFM low-current mode offers improved
system control. During PWM mode, the device
operates at a fixed-frequency of 2 MHz (typ.).
Hysteretic PFM mode extends the battery life by
reducing the quiescent current to 16 µA (typ.) during
light load and standby operation. Internal
synchronous rectification provides high efficiency
during PWM mode operation. In shutdown mode, the
device turns off and reduces battery consumption to
0.01 µA (typ.).
SOT-23, 5-Bump DSBGA and 6-Pin USON
Packages
TYPICAL APPLICATION CIRCUITS
V
IN
L1: 2.2 PH
2.7V to 5.5V
V
V
OUT
IN
SW
1
2
3
5
C
OUT
C
IN
LM3671
10 PF
GND
EN
4.7 PF
FB
4
Figure 1. Typical Application Circuit
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2013, Texas Instruments Incorporated