LM358 Low Power Dual Operational Amplifier
Low Power Dual Operational Amplifier
The LM358 contains two independent high gain operational
amplifiers with internal frequency compensation. The two op-amps
operate over a wide voltage range from a single power supply. Also
use a split power supply. The device has low power supply current
drain, regardless of the power supply voltage. The low power drain
also makes the IL358 a good choice for battery operation.
When your project calls for a traditional op-amp function, now
you can streamline your design with a simple single power supply.
Use ordinary + 5VDC common to practically any digital system or
personal computer application, without requiring an extra 15V
CD suffix
CS suffix
ORDERING INFORMATION
LM358CD DIP-8
power supply just to have the interface electronics you need.
The IL358 is a versatile, rugged workhorse with a thousand-and-
one uses, from amplifying signals from a variety of transducers to dc
gain blocks, or any op-amp function. The attached pages offer some
recipes that will have your project cooking in no time.
LM358CS SOP-8
TA = 0° to 70° C
for all packages.
·
·
·
Internally frequency compensated for unity gain
Large DC voltage gain: 100dB
Wide power supply range:
3V ~ 32V (or ±1.5V ~ ±16V)
·
·
·
·
·
Input common-mode voltage range includes ground
Large output voltage swing: 0V DC to VCC-1.5V DC
Power drain suitable for battery operation
Low input offset voltage and offset current
Differential input voltage range equal to the power supply voltage
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 4 = GND
PIN 8= VCC
1