5秒后页面跳转
LM3553 PDF预览

LM3553

更新时间: 2024-11-15 04:44:27
品牌 Logo 应用领域
美国国家半导体 - NSC 驱动器闪光灯
页数 文件大小 规格书
18页 393K
描述
1.2A Dual Flash LED Driver System with I2C Compatible

LM3553 数据手册

 浏览型号LM3553的Datasheet PDF文件第2页浏览型号LM3553的Datasheet PDF文件第3页浏览型号LM3553的Datasheet PDF文件第4页浏览型号LM3553的Datasheet PDF文件第5页浏览型号LM3553的Datasheet PDF文件第6页浏览型号LM3553的Datasheet PDF文件第7页 
March 6, 2008  
LM3553  
1.2A Dual Flash LED Driver System with I2C Compatible  
Interface  
General Description  
Features  
The LM3553 is a fixed frequency, current mode step-up DC/  
DC converter with two regulated current sinks. The device is  
capable of driving loads up to 1.2A from a single-cell Li-Ion  
battery.  
Accurate and Programmable LED Current up to 1.2A in  
128 Steps  
Total Solution Size < 30mm2  
90% Peak Efficiency  
One or more high current flash LEDs can be driven in series  
either in a high power Flash mode or a lower power Torch  
mode controlled by either an internal register or the FEN pin.  
Additionally a low current (20mA) indicator mode and a fixed  
output voltage mode are also available.  
Drives 2 LEDs in Series with 1.2A from 5V Input  
Drives 2 LEDs in Series with 600mA from 3.0V Input  
Drives 1 LED with 1.2A from 3.0V Input  
Adjustable Over-Voltage Protection Allows for Single or  
Series LED Operation  
The LM3553 has 128 current levels and 16 flash safety timer  
durations that are user adjustable via an I2C compatible in-  
terface. Internal soft-start eliminates large inrush currents at  
start-up. Over-voltage protection circuitry and 1.2MHz switch-  
ing frequency allow for the use of small, low-cost output  
capacitors with lower voltage ratings.  
Four Operating Modes: Torch, Flash, Indicator, and  
Voltage Mode (4.98V)  
Programmable Flash Pulse Safety Timer in 16 Steps  
TX Input Ensures Synchronization with RF Power  
Amplifier Pulse or Prevents LED from Overheating  
The LM3553 includes a TX pin that forces Torch mode during  
a flash event allowing for synchronization between the RF  
power amplifier and Flash/Torch modes. It also includes a  
multi-function pin (M/F) that can serve as a GPIO and a hard-  
ware RESET pin.  
LED Disconnect During Shutdown  
Flash/Imager Synchronization via FEN Pin  
Active Low Hardware Reset  
Multi-Function Pin (RESET and GPIO)  
Low Profile 12-pin LLP Package (SDF12A: 3mm x 3mm x  
0.8mm, 0.4mm pitch)  
The LM3553 is available in National's 3mm by 3mm LLP12  
package.  
Applications  
Camera Phone LED Flash  
Smartphone and PDA Flash  
LED Backlight  
Typical Application Circuits  
20171419  
Solution Size  
20171415  
© 2008 National Semiconductor Corporation  
201714  
www.national.com  

与LM3553相关器件

型号 品牌 获取价格 描述 数据表
LM3553SD/NOPB TI

获取价格

具有 I2C 兼容接口的 1.2A 双闪存 LED 驱动器系统 | DQB | 12 |
LM3553SD-/NOPB NSC

获取价格

IC LED DISPLAY DRIVER, DSO12, 3 X 3 MM, 0.80 MM HEIGHT, 0.40 MM PITCH, LEAD FREE, HALOGEN
LM3553SD-HALF NSC

获取价格

1.2A Dual Flash LED Driver System with I2C Compatible
LM3553SD-NOPB NSC

获取价格

1.2A Dual Flash LED Driver System with I2C Compatible
LM3553SDX/NOPB TI

获取价格

具有 I2C 兼容接口的 1.2A 双闪存 LED 驱动器系统 | DQB | 12 |
LM3553SDX-HALF NSC

获取价格

1.2A Dual Flash LED Driver System with I2C Compatible
LM3553SDX-NOPB NSC

获取价格

1.2A Dual Flash LED Driver System with I2C Compatible
LM3554 NSC

获取价格

Synchronous Boost Con
LM3554 TI

获取价格

具有 1.2A 双路高侧 LED 驱动器和 I2C 兼容接口的同步升压转换器
LM3554TME/NOPB TI

获取价格

具有 1.2A 双路高侧 LED 驱动器和 I2C 兼容接口的同步升压转换器 | YFQ