Sample &
Buy
Support &
Community
Reference
Design
Product
Folder
Tools &
Software
Technical
Documents
LM2936
SNOSC48O –JUNE 2000–REVISED DECEMBER 2014
LM2936 Ultra-Low Quiescent Current LDO Voltage Regulator
1 Features
3 Description
The LM2936 ultra-low quiescent current regulator
1
•
•
•
LM2936 Operating VIN range of 5.5 V to 40 V
LM2936HV Operating VIN range of 5.5 V to 60 V
features low dropout voltage and low current in the
standby mode. With less than 15-μA quiescent
current at a 100-μA load, the LM2936 is ideally suited
for automotive and other battery operated systems.
The LM2936 retains all of the features that are
common to low dropout regulators including a low
dropout PNP pass device, short circuit protection,
reverse battery protection, and thermal shutdown.
The LM2936 has a 40-V maximum operating voltage
limit, a −40°C to 125°C operating temperature range,
and ±3% output voltage tolerance over the entire
output current, input voltage, and temperature range.
The LM2936 is available in a TO-92 through-hole
package, as well as SOIC-8, VSSOP, SOT–223, and
TO-252 surface mount packages.
Ultra Low Quiescent Current (IQ ≤ 15 μA for
IOUT = 100 μA)
•
•
•
Fixed 3-V, 3.3-V or 5-V with 50-mA Output
±2% Initial Output Tolerance
±3% Output Tolerance Over Line, Load, and
Temperature
•
•
•
•
•
•
Dropout Voltage Typically 200 mV at IOUT = 50 mA
–24-V Input Voltage Protection
–50-V Input Transient Protection
Internal Short Circuit Current Limit
Internal Thermal Shutdown Protection
Shutdown Pin Available with LM2936BM Package
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
4.90 mm x 3.91 mm
6.10 mm x 6.58 mm
3.00 mm x 3.00 mm
6.50 mm x 3.50 mm
4.30 mm x 4.30 mm
2 Applications
SOIC (8)
•
•
•
Automotive
TO-252 (3)
VSSOP (8)
SOT-223 (4)
TO-92 (3)
Industrial Controls
Point of Load
LM2936
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Schematic
VIN
IN
OUT
VOUT
GND
CIN
COUT
100 nF *
10 µF **
* Required if regulator is located more than 2″ from power supply filter capacitor.
** Required for stability. See Electrical Characteristics for 3-V LM2936 for required values. Must be rated over
intended operating temperature range. Effective series resistance (ESR) is critical, see Typical Characteristics. Locate
capacitor as close as possible to the regulator output and ground pins. Capacitance may be increased without bound.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.