ON Semiconductort
LM2935
Low Dropout
Dual Voltage Regulator
LOW DROPOUT
The LM2935 is a dual positive 5.0 V low dropout voltage regulator,
designed for standby power systems. The main output is capable of
supplying 750 mA for microprocessor power, and can be turned “on”
and “off” by the switch/reset input. The other output is dedicated for
standby operation of volatile memory, and is capable of supplying up
to 10 mA loads. The total device features a low quiescent current of
3.0 mA or less when supplying 10 mA from the standby output.
This part was designed for harsh automotive environments and is
therefore immune to many input supply voltage problems such as
reverse battery (–12 V), double battery (+24 V), and load dump
transients (+60 V).
DUAL VOLTAGE REGULATOR
SEMICONDUCTOR
TECHNICAL DATA
TH SUFFIX
PLASTIC PACKAGE
CASE 314A
• Two Regulated 5.0 V Outputs
• Main Output Current in Excess of 750 mA
• On/Off Control of Main Output
1
5
• Standby Output Current in Excess of 10 mA
• Low Input/Output Differential of Less than 0.6 V at 500 mA
• Short Circuit Current Limiting
TV SUFFIX
PLASTIC PACKAGE
1
CASE 314B
• Internal Thermal Shutdown
5
• Low Voltage Indicator Output
• Designed for Automotive Environment Including
Heatsink surface connected to Pin 3.
• Reverse Battery Protection
• Double Battery Protection
• Load Dump Protection
• Reverse Transient Protection
• Economical 5–Lead TO–220 Package with Two Optional Leadforms
• Also Available in Surface Mount D PAK Package
T SUFFIX
PLASTIC PACKAGE
CASE 314D
2
1
5
Pin 1. Input Voltage/V
2. Main Output
3. Ground
CC
4. Switch/Reset
5. Standby/Output
ORDERING INFORMATION
Operating
D2T SUFFIX
PLASTIC PACKAGE
CASE 936A
Temperature Range
Device
LM2935D2T
LM2935T
Package
Surface Mount
Plastic Power
Horizontal Mount
Vertical Mount
2
(D PAK)
1
5
T = –40° to +125°C
J
LM2935TH
LM2935TV
Heatsink surface (shown as terminal 6
in case outline drawing) is connected to Pin 3.
Semiconductor Components Industries, LLC, 2001
1
Publication Order Number:
LM2935/D
April, 2001 – Rev. 2