LM293-EP
DUAL DIFFERENTIAL COMPARATOR
www.ti.com
SLCS155–OCTOBER 2007
1
FEATURES
•
Controlled Baseline
•
Low Supply-Current Drain Independent of
Supply Voltage . . . 0.4 mA Typical Per
Comparator
–
–
–
One Assembly
Test Site
•
•
•
Low Input Bias Current . . . 25 nA Typical
Low Input Offset Voltage . . . 2 mV Typical
One Fabrication Site
•
•
Extended Temperature Performance of
–55°C to 125°C
Common-Mode Input Voltage Range Includes
Ground
Enhanced Diminishing Manufacturing Sources
(DMS) Support
•
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V
•
•
•
•
Enhanced Product Change Notification
•
•
Low Output Saturation Voltage
(1)
Qualification Pedigree
Output Compatible With TTL, MOS, and CMOS
Single Supply or Dual Supplies
Wide Range of Supply Voltage
LM293 . . . D PACKAGE
(TOP VIEW)
–
–
Max Rating . . . 2 V to 36 V
Tested to 30 V
1OUT
1IN–
1IN+
GND
VCC
1
2
3
4
8
7
6
5
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
2OUT
2IN–
2IN+
electromigration, bond intermetallic life, and mold-compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
DESCRIPTION/ORDERING INFORMATION
This device consist of two independent voltage comparators that are designed to operate from a single power
supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference
between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode
voltage. Current drain is independent of the supply voltage. The outputs can be connected to other
open-collector outputs to achieve wired-AND relationships.
The LM293-EP is characterized for operation from –55°C to 125°C.
ORDERING INFORMATION(1)
VIOmax
AT 25°C
TA
MAX VCC
30 V
PACKAGE(2)
ORDERABLE PART NUMBER
TOPSIDE MARKING
LM293E
–55°C to 125°C 5 mV
SOIC – D Reel of 2500 LM293MDREP
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.