LM2902LV, LM2904LV
SBOS960C – SEPTEMBER 2018 – REVISED FEBRUARY 2022
LM290xLV Industry Standard, Low Voltage Operational Amplifiers
1 Features
3 Description
•
Industry standard amplifier for cost-sensitive
systems
Low input offset voltage: ±1 mV
Common-mode voltage range includes ground
Unity-gain bandwidth: 1 MHz
Low broadband noise: 40 nV/√Hz
Low quiescent current: 90 µA/Ch
Unity-gain stable
Operational at supply voltages from 2.7 V to 5.5 V
Offered in dual- and quad-channel variants
Robust ESD specification: 2-kV HBM
Extended temperature range: –40°C to 125°C
The LM290xLV family includes the dual LM2904LV
and quad LM2902LV operational amplifiers, or op
amps. The devices operate from a low voltage of
2.7 V to 5.5 V.
•
•
•
•
•
•
•
•
•
•
These op amps supply an alternative to the
LM2904 and LM2902 in low-voltage applications
that are sensitive to cost. Some applications are
large appliances, smoke detectors, and personal
electronics. The LM290xLV devices supply better
performance than the LM290x devices at low voltage,
and have lower power consumption. The op amps are
stable at unity gain, and do not have reverse phase
in overdrive conditions. The design for ESD gives the
LM290xLV family an HBM specification for a minimum
of 2 kV.
2 Applications
•
•
•
•
•
•
•
Cordless appliances
Uninterruptible power supply
Battery pack, charger, and test equipment
Power supply modules
Environmental sensors signal conditioning
Field transmitter: temperature sensors
Oscilloscopes, digital multimeters, and signal
analyzers
Rack mount server
HVAC: heating, ventilating, and air conditioning
DC motor control
The LM290xLV family is available in packages that
have industry standards. The packages include SOIC,
VSSOP, and TSSOP packages.
Device Information
PART NUMBER(1)
PACKAGE
BODY SIZE (NOM)
8.65 mm × 3.91 mm
4.40 mm × 5.00 mm
4.20 mm × 2.00 mm
3.91 mm × 4.90 mm
3.00 mm × 4.40 mm
1.60 mm × 2.90 mm
3.00 mm × 3.00 mm
SOIC (14)
•
•
•
•
LM2902LV
TSSOP (14)
SOT-23 (14)
SOIC (8)
Low-side current sensing
TSSOP (8)
SOT-23 (8)
VSSOP (8)
LM2904LV
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
RF
RG
R1
VOUT
VIN
C1
1
2pR1C1
f
=
-3 dB
VOUT
VIN
RF
1
1 + sR1C1
=
1 +
(
RG
Single-Pole, Low-Pass Filter
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.