Datasheet
LM358xxx LM324xxx LM2904xxx LM2902xxx
(10) Power Supply Rejection Ratio (PSRR)
Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed.
It is normally the fluctuation of DC.
PSRR= (Change of Power Supply Voltage)/( Input Offset Fluctuation)
(11) Output Source Current/ Output Sink Current (ISOURCE / ISINK
)
The maximum current that the IC can output under specific output conditions. The output source current indicates the
current flowing out from the IC, and the output sink current indicates the current flowing into the IC.
(12) Channel Separation (CS)
Indicates the fluctuation in the output voltage of the driven channel with reference to the change of output voltage of
the channel which is not driven.
(13) Slew Rate (SR)
Indicates the rate of the change of the output voltage with time when a step input signal is applied.
(14) Gain Bandwidth (GBW)
The product of the open-loop voltage gain and the frequency at which the voltage gain decreases 6dB/octave.
(15) Phase Margin (θ)
Indicates the margin of phase from 180 degree phase lag at unity gain frequency.
(16) Input Referred Noise Voltage (VN)
Indicates a noise voltage generated inside the operational amplifier equivalent by ideal voltage source connected in
series with input pin.
www.rohm.com
©2015 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-0GMG0G200190-1-2
01.Aug.2016 Rev.005
6/44