LM2902-EP
www.ti.com
SGLS335A–APRIL 2006–REVISED APRIL 2006
QUADRUPLE OPERATIONAL AMPLIFIER
FEATURES
•
Common-Mode Input Voltage Range Includes
Ground, Allowing Direct Sensing Near
Ground
•
Controlled Baseline
– One Assembly/Test Site, One Fabrication
Site
•
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage:
•
•
•
Extended Temperature Performance of -55°C
to 125°C
– Non-V devices . . . 26 V
– V-Suffix devices . . . 32 V
Enhanced Diminishing Manufacturing
Sources (DMS) Support
•
•
V-Suffix devices . . . 32 V D Open-Loop
Differential Voltage Amplification . . . 100
V/mV Typ
Enhanced Product-Change Notification
Qualification Pedigree
•
Internal Frequency Compensation
(1)
Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
D OR PW PACKAGE
(TOP VIEW)
1
2
3
4
5
6
7
14
13
12
11
10
9
1OUT
1IN−
1IN+
4OUT
4IN−
4IN+
GND
3IN+
3IN−
3OUT
•
•
ESD Protection <500 V Per MIL-STD-883,
Method 3015; Exceeds 200 V Using Machine
Model C = 200 pF, R = 0); 1500 V Using
Charged Device Model
V
CC
2IN+
2IN−
8
2OUT
ESD Human Body Model >2 kV Machine
Model >200 V and Charge Device Model = 2
kV For K-Suffix Devices.
•
•
Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
Low Input Bias and Offset Parameters:
– Input Offset Voltage . . . 3 mV Typ
– Input Offset Current . . . 2 nA Typ
– Input Bias Current . . . 20 nA Typ
DESCRIPTION
This device consists of four independent high-gain frequency-compensated operational amplifiers that are
designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies
is possible when the difference between the two supplies is 3 V to 26 V (3 V to 32 V for V-suffixed devices) and
VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is
independent of the magnitude of the supply voltage.
Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier
circuits that now can be more easily implemented in single-supply voltage systems. For example, the LM2902
can be operated directly from the standard 5-V supply that is used in digital systems and easily provides the
required interface electronics without requiring additional ±15-V supplies.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.