Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM2734Z, LM2734Z-Q1
SNVS334F –JANUARY 2005–REVISED JANUARY 2016
LM2734Z/-Q1 Thin SOT 1-A Load Step-Down DC-DC Regulator
1 Features
3 Description
The LM2734Z regulator is
a monolithic, high-
1
•
•
Qualified for Automotive Applications
frequency, PWM step-down DC–DC converter
assembled in a thick 6-pin SOT and a WSON non-
pullback package. The device provides all the active
functions to provide local DC–DC conversion with fast
transient response and accurate regulation in the
smallest possible PCB area.
AEC-Q100 Qualified With the Following Results:
–
Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range
–
–
Device HBM ESD Classification Level 2
Device CDM ESD Classification Level C6
With a minimum of external components and online
design support through WEBENCH™, the LM2734Z
is easy to use. The ability to drive 1-A loads with an
internal 300-mΩ NMOS switch using state-of-the-art
0.5-µm BiCMOS technology results in the best power
density available. The world class control circuitry
allows for ON-times as low as 13 ns, thus supporting
exceptionally high-frequency conversion over the
entire 3-V to 20-V input operating range down to the
minimum output voltage of 0.8 V. Switching frequency
is internally set to 3 MHz, allowing the use of
extremely small surface mount inductors and chip
capacitors. Even though the operating frequency is
very high, efficiencies up to 85% are easy to achieve.
External shutdown is included, featuring an ultra-low
standby current of 30 nA. The LM2734Z uses current-
mode control and internal compensation to provide
high-performance regulation over a wide range of
operating conditions. Additional features include
internal soft-start circuitry to reduce inrush current,
pulse-by-pulse current limit, thermal shutdown, and
output overvoltage protection.
•
•
•
•
•
•
•
•
•
•
•
6-pin SOT Package, or 6-Pin WSON Package
3.0-V to 20-V Input Voltage Range
0.8-V to 18-V Output Voltage Range
1-A Output Current
3-MHz Switching Frequency
300-mΩ NMOS Switch
30-nA Shutdown Current
0.8-V, 2% Internal Voltage Reference
Internal Soft-Start
Current-Mode, PWM Operation
Thermal Shutdown
2 Applications
•
•
•
•
•
DSL Modems
Local Point of Load Regulation
Battery-Powered Devices
USB-Powered Devices
Automotive
Device Information(1)
PART NUMBER
PACKAGE
WSON (6)
SOT (6)
BODY SIZE (NOM)
3.00 mm × 3.00 mm
1.60 mm × 2.90 mm
LM2734Z
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application Circuit
Efficiency vs Load Current
D2
V
.hh{Ç
{í
V
IN
IN
[1
C3
D1
C1
V
OUT
[a2734
ON
C2
9b
R1
R2
OFF
C.
Db5
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.