5秒后页面跳转
捷配首页

Datasheet > LM26LVQISDX-135/NOPB
LM26LVQISDX-135/NOPB PDF预览

LM26LVQISDX-135/NOPB

更新时间： 2024-11-16 11:10:23
品牌 Logo 应用领域
德州仪器 - TI 开关输出元件传感器换能器
页数 文件大小 规格书
36页 1390K
描述
汽车级、±3°C、1.6V-5.5V、出厂预设跳变点温度开关 | NGF | 6 | -40 to 150

阅读下载

中文翻译

获取价格

LM26LVQISDX-135/NOPB 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Active包装说明：SOLCC6,.1,25
Reach Compliance Code：compliantFactory Lead Time：8 weeks
风险等级：0.8最大精度（摄氏度）：2.3 Cel
其他特性：IT ALSO HAS ACCURACY MINUS 2.3, 2.2 AND 1.7主体宽度：2.2 mm
主体高度：0.8 mm主体长度或直径：2.5 mm
JESD-609代码：e3安装特点：SURFACE MOUNT
端子数量：6最大工作电流：0.016 mA
最高工作温度：150 °C最低工作温度：-40 °C
封装主体材料：PLASTIC/EPOXY封装等效代码：SOLCC6,.1,25
封装形状/形式：RECTANGULAR电源：1.8/5 V
筛选级别：AEC-Q100传感器/换能器类型：TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SINGLE TRIP POINT
子类别：Other Sensors/Transducers最大供电电压：5.5 V
最小供电电压：1.6 V表面贴装：YES
温度系数：NEGATIVE ppm/ °C端子面层：Matte Tin (Sn)
端接类型：SOLDERBase Number Matches：1

LM26LVQISDX-135/NOPB 数据手册

 浏览型号LM26LVQISDX-135/NOPB的Datasheet PDF文件第2页浏览型号LM26LVQISDX-135/NOPB的Datasheet PDF文件第3页浏览型号LM26LVQISDX-135/NOPB的Datasheet PDF文件第4页浏览型号LM26LVQISDX-135/NOPB的Datasheet PDF文件第5页浏览型号LM26LVQISDX-135/NOPB的Datasheet PDF文件第6页浏览型号LM26LVQISDX-135/NOPB的Datasheet PDF文件第7页 
Sample &  
Buy  
Support &  
Community  
Product  
Folder  
Tools &  
Software  
Technical  
Documents  
LM26LV, LM26LV-Q1  
SNIS144G –JULY 2007–REVISED SEPTEMBER 2016  
LM26LV and LM26LV-Q1 1.6-V, WSON-6 Factory Preset Temperature Switch and  
Temperature Sensor  
1 Features  
3 Description  
The LM26LV and LM26LV-Q1 are low-voltage,  
precision, dual-output, low-power temperature  
switches and temperature sensors. The temperature  
trip point (TTRIP) can be preset at the factory to any  
temperature in the range of 0°C to 150°C in 1°C  
1
•
Low 1.6-V Operation  
•
•
Low Quiescent Current  
Latching Function: Device Can Latch the Over  
Temperature Condition  
increments. Built-in temperature hysteresis (THYST  
keeps the output stable in an environment of  
temperature instability.  
)
•
Push-Pull and Open-Drain Temperature Switch  
Outputs  
•
•
Wide Trip Point Range of 0°C to 150°C  
In normal operation the LM26LV or LM26LV-Q1  
temperature switch outputs assert when the die  
temperature exceeds TTRIP. The temperature switch  
outputs will reset when the temperature falls below a  
Very Linear Analog VTEMP Temperature Sensor  
Output  
•
•
VTEMP Output Short-Circuit Protected  
temperature equal to (TTRIP  
–
THYST). The  
Accurate Over –50°C to 150°C Temperature  
Range  
OVERTEMP digital output, is active-high with a push-  
pull structure, while the OVERTEMP digital output, is  
active-low with an open-drain structure.  
•
•
Excellent Power Supply Noise Rejection  
LM26LVQISD-130 and LM26LVQISD-135 are  
AEC-Q100 Qualified and are Manufactured on an  
Automotive Grade Flow:  
The analog output, VTEMP, delivers an analog output  
voltage with Negative Temperature Coefficient (NTC).  
Driving the TRIP_TEST input high causes the digital  
outputs to be asserted for in-situ verification and  
causes the threshold voltage to appear at the VTEMP  
output pin, which could be used to verify the  
temperature trip point.  
–
Device Temperature Grade 0: –40°C to 150°C  
Ambient Operating Temperature Range  
–
–
–
Device HBM ESD Classification Level 3 A  
Device CDM ESD Classification Level C6  
Device MM ESD Classification Level M3  
The LM26LV's and LM26LV-Q1's low minimum  
supply voltage makes them ideal for 1.8-V system  
designs. The wide operating range, low supply  
2 Applications  
current, and excellent accuracy provide  
temperature switch solution for a wide range of  
commercial and industrial applications.  
a
•
•
•
•
•
•
Cell Phones and Wireless Transceivers  
Digital Cameras  
Battery Management Systems  
Automotive Applications  
Disk Drives  
Device Information(1)  
PART NUMBER  
PACKAGE  
BODY SIZE (NOM)  
LM26LV, LM26LV-Q1 WSON (6)  
2.20 mm × 2.50 mm  
Games and Appliances  
(1) For all available packages, see the orderable addendum at  
the end of the data sheet.  
Redundant Protection and Monitoring  
Typical Transfer Characteristic  
V
V
Supply  
DD  
DD  
Analog  
(+1.6V to +5.5V)  
V
ADC Input  
TEMP  
Example: 2 to 3  
Battery Cells  
LM26LV  
Microcontroller  
OVERTEMP  
OVERTEMP  
TRIP TEST  
GND  
Copyright © 2016, Texas Instruments Incorporated  
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,  
intellectual property matters and other important disclaimers. PRODUCTION DATA.  
 
 
 
1234567...36

中文翻译

下载PDF

LM26LVQISDX-135/NOPB 替代型号

型号 品牌 替代类型 描述 数据表
LM26LVCISD-135/NOPB TI

完全替代

 具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |
LM26LVCISDX-135/NOPB TI

类似代替

 1.6V-Capable Temperature Sensor Switch with Factory Programmed Trip Points 6-WSON 0 to 150

与LM26LVQISDX-135/NOPB相关器件

型号 品牌 获取价格 描述 数据表
LM26NV NSC

获取价格

 		SOT-23, ±3°C Accurate, Factory Preset Therm
LM27 NSC

获取价格

 		SOT-23, 3 Degree Celcious Accurate, 120-150 Degree Celcious Factory Preset Thermostat
LM27_06 NSC

获取价格

 		SOT-23, ±3°C Accurate, 120°C-150°C Factory Pr
LM2700 NSC

获取价格

 		600kHz/1.25MHz, 2.5A, Step-up PWM DC/DC Converter
LM2700 TI

获取价格

 		LM2700 600kHz/1.25MHz, 2.5A, Step-up PWM DC/DC Converter
LM2700_04 NSC

获取价格

 		600kHz/1.25MHz, 2.5A, Step-up PWM DC/DC Converter
LM2700_15 TI

获取价格

 		LM2700 600kHz/1.25MHz, 2.5A, Step-up PWM DC/DC Converter
LM2700LD-ADJ NSC

获取价格

 		600kHz/1.25MHz, 2.5A, Step-up PWM DC/DC Converter
LM2700LD-ADJ/NOPB TI

获取价格

 		LM2700 600kHz/1.25MHz, 2.5A, Step-up PWM DC/DC Converter
LM2700LDX-ADJ NSC

获取价格

 		600kHz/1.25MHz, 2.5A, Step-up PWM DC/DC Converter

与LM26LVQISDX-135/NOPB相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证