May 2004
LM2675EP
Enhanced Plastic SIMPLE SWITCHER® Power Converter
High Efficiency 1A Step-Down Voltage Regulator
ENHANCED PLASTIC
General Description
•
•
•
•
•
•
Extended Temperature Performance of−40˚C to +125˚C
Baseline Control - Single Fab & Assembly Site
Process Change Notification (PCN)
The LM2675EP series of regulators are monolithic inte-
grated circuits built with a LMDMOS process. These regula-
tors provide all the active functions for a step-down (buck)
switching regulator, capable of driving a 1A load current with
excellent line and load regulation. These devices are avail-
able in fixed output voltages of 3.3V, 5.0V, 12V, and an
adjustable output version.
Qualification & Reliability Data
Solder (PbSn) Lead Finish is standard
Enhanced Diminishing Manufacturing Sources (DMS)
Support
Requiring a minimum number of external components, these
regulators are simple to use and include patented internal
frequency compensation (Patent Nos. 5,382,918 and
5,514,947) and a fixed frequency oscillator.
Features
n Efficiency up to 96%
n Available in SO-8, 8-pin DIP and LLP packages
n Computer Design Software LM267X Made Simple
(version 6.0)
The LM2675EP series operates at a switching frequency of
260 kHz, thus allowing smaller sized filter components than
what would be needed with lower frequency switching regu-
>
lators. Because of its very high efficiency ( 90%), the cop-
n Simple and easy to design with
per traces on the printed circuit board are the only heat
sinking needed.
n Requires only 5 external components
n Uses readily available standard inductors
n 3.3V, 5.0V, 12V, and adjustable output versions
n Adjustable version output voltage range: 1.21V to 37V
A family of standard inductors for use with the LM2675EP
are available from several different manufacturers. This fea-
ture greatly simplifies the design of switch-mode power sup-
plies using these advanced ICs. Also included in the
datasheet are selector guides for diodes and capacitors
designed to work in switch-mode power supplies.
n
1.5% max output voltage tolerance over line and load
conditions
n Guaranteed 1A output load current
n 0.25Ω DMOS Output Switch
n Wide input voltage range: 8V to 40V
n 260 kHz fixed frequency internal oscillator
n TTL shutdown capability, low power standby mode
n Thermal shutdown and current limit protection
Other features include a guaranteed 1.5% tolerance on
output voltage within specified input voltages and output
load conditions, and 10% on the oscillator frequency. Ex-
ternal shutdown is included, featuring typically 50 µA
stand-by current. The output switch includes current limiting,
as well as thermal shutdown for full protection under fault
conditions.
Typical Applications
To simplify the LM2675EP buck regulator design procedure,
there exists computer design software, LM267X Made
Simple version 6.0.
>
n Simple High Efficiency ( 90%) Step-Down (Buck)
Regulator
n Efficient Pre-Regulator for Linear Regulators
n Positive-to-Negative Converter
n Selected Military Applications
n Selected Avionics Applications
Ordering Information
PART NUMBER
LM2675MX-ADJEP
(Notes 1, 2)
VID PART NUMBER
V62/04630-01
TBD
NS PACKAGE NUMBER (Note 3)
M08A
TBD
Note 1: For
the
following
(Enhanced
Plastic)
versions,
check
for
availability:
LM2675LD-12EP,
LM2675LDX-12EP,
LM2675LD-3.3EP, LM2675LDX-3.3EP, LM2675LD-5.0EP, LM2675LDX-5.0EP, LM2675LD-ADJEP, LM2675LDX-ADJEP, LM2675M-12EP, LM2675MX-12EP,
LM2675M-3.3EP, LM2675MX-3.3EP, LM2675M-5.0EP, LM2675MX-5.0EP, LM2675M-ADJEP, LM2675N-12EP, LM2675N-3.3EP, LM2675N-5.0EP,
LM2675N-ADJEP. Parts listed with an "X" are provided in Tape & Reel and parts without an "X" are in Rails.
Note 2: FOR ADDITIONAL ORDERING AND PRODUCT INFORMATION, PLEASE VISIT THE ENHANCED PLASTIC WEB SITE AT: www.national.com/
mil
Note 3: Refer to package details under Physical Dimensions
SIMPLE SWITCHER® is a registered trademark of National Semiconductor Corporation.
Windows® is a registered trademark of Microsoft Corporation.
© 2004 National Semiconductor Corporation
DS200994
www.national.com