3.0A, 150kHz, Step-Down Switching Regulator
LM2596
FEATURES
TO-220 PKG
3.3V, 5.0V, 12V, and Adjustable Output Versions
Adjustable Version Output Voltage Range, 1.2 to 37V
+/- 4%. Maximum Over Line and Load Conditions
Guaranteed 3.0A Output Current
Wide Input Voltage Range
1
5
Requires Only 4 External Components
150kHz Fixed Frequency Internal Oscillator
TTL Shutdown Capability, Low Power Standby Mode
High Efficiency
TO-220V PKG
1
Uses Readily Available Standard Inductors
Thermal Shutdown and Current Limit Protection
Moisture Sensitivity Level 3
5
Applications
TO-263 PKG
Simple High-Efficiency Step-Down(Buck) Regulator
Efficient Pre-Regulator for Linear Regulators
On-Card Switching Regulators
1
Positive to Negative Converter(Buck-Boost)
Negative Step-Up Converters
5
1. Vin 2. Output 3. Ground
4. Feedback 5. On/Off
Power Supply for Battery Chargers
DESCRIPTION
ORDERING INFORMATION
The LM2596 series of regulators are monolithic integrated
circuits ideally suited for easy and convenient design of a
step-down switching regulator(buck converter).
All circuits of this series are capable of driving a 3.0A load
with excellent line and load regulation. These devices are
available in fixed output voltages of 3.3V, 5.0V,12V,
and an adjustable output version.
Device
LM2596T-X.X
LM2596TV-X.X
LM2596R
Marking
Package
TO-220
TO-220V
TO-263
LM2596-X.X
LM2596-X.X
LM2596-X.X
These regulators were designed to minimize the number of external components to simplify the
power supply design. Standard series of inductors optimized for use with the LM2596 are offered
by several different inductor manufacturers.
Since the LM2596 converter is a switch-mode power supply, its efficiency is significantly higher in
comparison with popular three-terminal limear regulators, especially with higher input voltages.
In many cases, the power dissipated is so low that no heatsink is required or its size could
be reduced dramatically. A standard series of inductors optimized for use with the TJ2596 are
available from several different manufacturers. This feature greatly simplifies the design of
switch-mode power supplies. The LM2596 features include a guaranteed +/- 4% tolerance
on output voltage within specified input voltages and output load conditions, and +/-15% on the
oscillator frequency (+/- 2% over 0℃ to 125℃).
External shutdown is included, featuring 80㎂ (typical) standby current. Self protection features include
a two stage frequency reducing current limit for output switch and an over temperature shutdown for complete
protection under fault conditions.
Dec. 2009 - Rev.1.3.1
HTC
− 1 −