3A, 52kHz, Step-down Switching Regulator
LM2576HV
FEATURES
Step-down Switching Regulator
SOP-8PP PKG
Adjustable Version Output Voltage Range, 1.23V to 52V
± 4% Max over Line and Load conditions
Guaranteed Output Current of 3A
TO-263 PKG
Fixed Output Voltages : 3.3V, 5.0V, 12V and 15V
Wide Input Voltage Range 60V
52 kHz Fixed Frequency Oscillator
TTL Shutdown Capability, Low Power Standby Mode
Requires only 4 External Components
High Efficiency
TO-220 PKG
Use Readily Available Standard Inductors
Available in TO-220, TO-263 and SOP-8PP Packages
Thermal Shutdown and Current Limit Protection
Moisture Sensitivity Level 3
ORDERING INFORMATION
Device
APPLICATION
Package
Simple high-efficiency step-down (buck) regulator
Efficient pre-regulator for linear regulators
On-card switching regulators
LM2576HVDP-ADJ
LM2576HVDP-X.X
LM2576HVR-ADJ
LM2576HVR-X.X
LM2576HVT-ADJ
SOP-8PP 8L
TO-263 5L
TO-220 5L
Positive to negative converter (Buck-Boost)
LM2576HVT-X.X
X.X = Output Voltage = 3.3, 5.0, 12, 15
DESCRIPSION
The LM2576HV series of regulators are monolithic integrated circuits that provide all the active functions for a
step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. These
devices are available in fixed output voltages of 3.3V, 5.0V, 12V, 15V and adjustable output versions.
Requiring a minimum number of external components, these regulators are simple to use and include internal
frequency compensation and a fixed-frequency oscillator. The LM2576HV series offers a high-efficiency
replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in
some cases no heat sink is required. A standard series of inductors optimized for use with the LM2576HV are
available from several different manufacturers. This feature greatly simplifies the design of switch-mode power
supplies. Other features include a guaranteed ± 4% tolerance on output voltage within specified input voltages
and output load conditions, and ± 10% on the oscillator frequency. External shutdown is included, featuring 50uA
(typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown
for full protection under fault conditions.
Absolute Maximum Ratings (Note 1)
CHARACTERISTIC
SYMBOL
VIN
MIN.
MAX.
UNIT
Input Supply Voltage
-
63
V
V
ON/OFF Pin Input Voltage
-0.3
-0.75
+ VIN
Output Voltage to Ground (Steady State)
Lead Temperature (Soldering, 5 sec)
Storage Temperature Range
V
TSOL
TSTG
TJOPR
260
150
150
℃
℃
℃
-65
-
Maximum Junction Temperature Range
Feb. 2014 – R1.0
- 1 -
HTC