LM25011, LM25011-Q1
www.ti.com
SNVS617G –APRIL 2009–REVISED FEBRUARY 2013
LM25011, LM25011Q, LM25011A, LM25011AQ
42V 2A Constant On-Time Switching Regulator With Adjustable Current Limit
Check for Samples: LM25011, LM25011-Q1
1
FEATURES
•
•
•
Thermal Shutdown
Precision 2% Feedback Reference
Package: 10-Pin, VSSOP
2
•
LM25011Q is an Automotive Grade Product
that is AEC-Q100 Grade 1 Qualified (-40°C to
+125°C Operating Junction Temperature)
DESCRIPTION
•
LM25011A Allows Low Dropout Operation at
High Switching Frequency
The LM25011 Constant On-time Step-Down
Switching Regulator features all the functions needed
to implement a low cost, efficient, buck bias regulator
capable of supplying up to 2A of load current. This
high voltage regulator contains an N-Channel Buck
switch, a startup regulator, current limit detection, and
internal ripple control. The constant on-time
regulation principle requires no loop compensation,
results in fast load transient response, and simplifies
circuit implementation. The operating frequency
remains constant with line and load. The adjustable
valley current limit detection results in a smooth
transition from constant voltage to constant current
mode when current limit is reached, without the use
of current limit foldback. The PGD output indicates
the output voltage has increased to within 5% of the
expected regulation value. Additional features
include: Low output ripple, VIN under-voltage lock-
out, adjustable soft-start timing, thermal shutdown,
gate drive pre-charge, gate drive under-voltage lock-
out, and maximum duty cycle limit.
•
•
•
•
Input Operating Voltage Range: 6V to 42V
Absolute Maximum Input Rating: 45V
Integrated 2A N-Channel Buck Switch
Adjustable Current Limit Allows for Smaller
Inductor
•
•
•
•
•
Adjustable Output Voltage from 2.51V
Minimum Ripple Voltage at VOUT
Power Good Output
Switching Frequency Adjustable to 2 MHz
COT Topology Features:
–
Switching Frequency Remains Nearly
Constant with Load Current and Input
Voltage Variations
–
–
–
Ultra-Fast Transient Response
No Loop Compensation Required
Stable Operation with Ceramic Output
Capacitors
The LM25011A has a shorter minimum off-time than
the LM25011, which allows for higher frequency
operation at low input voltages.
–
Allows for Smaller Output Capacitor and
Current Sense Resistor
•
Adjustable Soft-Start Timing
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2013, Texas Instruments Incorporated