Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM22679, LM22679-Q1
SNVS581L –FEBRUARY 2013–REVISED NOVEMBER 2014
®
LM22679/-Q1 42-V, 5-A SIMPLE SWITCHER Step-Down Voltage Regulator
With Features
1 Features
3 Description
The LM22679 switching regulator provides all of the
functions necessary to implement an efficient high-
voltage step-down (buck) regulator using a minimum
of external components. This easy-to-use regulator
incorporates a 42-V N-channel MOSFET switch that
can provide up to 5 A of load current. Excellent line
and load regulation along with high efficiency (> 90%)
are featured. Voltage mode control offers short
minimum on-time, allowing the widest ratio between
input and output voltages. Internal loop compensation
means that the user is free from the tedious task of
calculating the loop compensation components. Fixed
5-V output and adjustable output voltage options are
available. A switching frequency of 500 kHz allows for
small external components and good transient
response. An adjustable soft-start feature is provided
through the selection of a single external capacitor. In
addition, the switch-current limit can be programmed
with a single external resistor, allowing solution
optimization. The LM22679 device also has built-in
thermal shutdown and current limiting to protect
against accidental overloads.
1
•
Wide Input Voltage Range: 4.5 V to 42 V
Internally Compensated Voltage Mode Control
Stable With Low ESR Ceramic Capacitors
100-mΩ N-Channel MOSFET
•
•
•
•
Output Voltage Options:
-ADJ (Outputs as Low as 1.285 V)
-5.0 (Output Fixed to 5 V)
•
•
•
±1.5% Feedback Reference Accuracy
Switching Frequency of 500 kHz
–40°C to 125°C Operating Junction Temperature
Range
•
•
•
•
•
Adjustable Soft-Start
Adjustable Current Limit
Integrated Boot-Strap Diode
Fully WEBENCH® Enabled
LM22679-Q1 is AEC-Q100 Qualified and
Manufactured on an Automotive-Grade Flow
•
PFM (Exposed Pad) Package
SIMPLE
SWITCHER®
family.
The
SIMPLE
SWITCHER concept provides for an easy to use
complete design using a minimum number of external
components and the TI WEBENCH design tool. TI's
WEBENCH tool includes features such as external
component calculation, electrical simulation, thermal
simulation, and Build-It boards for easy design-in.
2 Applications
•
•
•
•
Industrial Control
Telecom and Datacom Systems
Embedded Systems
Conversions from Standard 24-V, 12-V and 5-V
Input Rails
Device Information(1)
PART NUMBER
LM22679
PACKAGE
BODY SIZE (NOM)
TO-263 (7)
10.16 mm x 9.85 mm
LM22679-Q1
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Application Schematic
VIN
VIN
FB
BOOT
SW
LM22679-ADJ
VOUT
IADJ
GND
SS
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.