Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM22673, LM22673-Q1
SNVS586O –SEPTEMBER 2008–REVISED NOVEMBER 2014
®
LM22673/-Q1 42 V, 3 A SIMPLE SWITCHER , Step-Down Voltage Regulator
with Features
1 Features
3 Description
The LM22673 switching regulator provides all of the
functions necessary to implement an efficient high
voltage step-down (buck) regulator using a minimum
of external components. This easy to use regulator
incorporates a 42 V N-channel MOSFET switch
capable of providing up to 3 A of load current.
Excellent line and load regulation along with high
efficiency (> 90%) are featured. Voltage mode control
offers short minimum on-time, allowing the widest
ratio between input and output voltages. Internal loop
compensation means that the user is free from the
tedious task of calculating the loop compensation
components. Fixed 5 V output and adjustable output
voltage options are available. A switching frequency
of 500 kHz allows for small external components and
good transient response. An adjustable soft-start
feature is provided through the selection of a single
external capacitor. In addition, the switch current limit
can be programmed with a single external resistor,
allowing solution optimization. The LM22673 device
also has built-in thermal shutdown, and current
limiting to protect against accidental overloads.
1
•
Wide Input Voltage Range: 4.5 V to 42 V
Internally Compensated Voltage Mode Control
Stable with Low ESR Ceramic Capacitors
120 mΩ N-Channel MOSFET PFM Package
•
•
•
•
100 mΩ N-Channel MOSFET SO PowerPAD
Package
•
Output Voltage Options:
-ADJ (Outputs as Low as 1.285 V)
-5.0 (Output Fixed to 5 V)
•
•
•
±1.5% Feedback Reference Accuracy
Switching Frequency of 500 kHz
–40°C to 125°C Operating Junction
Temperature Range
•
•
•
•
•
Adjustable Soft-Start
Adjustable Current Limit
Integrated Boot-Strap Diode
Fully Webench® Enabled
LM22673-Q1 is an Automotive Grade Product
that is AEC-Q100 Grade 1 Qualified (–40°C to
+125°C Junction Temperature)
The LM22673 device is
a member of Texas
Instruments' SIMPLE SWITCHER® family. The
SIMPLE SWITCHER® concept provides for an easy
to use complete design using a minimum number of
external components and the TI WEBENCH® design
tool. TI's WEBENCH® tool includes features such as
external component calculation, electrical simulation,
thermal simulation, and Build-It boards for easy
design-in.
•
•
SO PowerPAD (Exposed Pad)
PFM (Exposed Pad)
2 Applications
•
•
•
•
Industrial Control
Telecom and Datacom Systems
Embedded Systems
Device Information(1)
Conversions from Standard 24 V, 12 V and 5 V
Input Rails
PART NUMBER
PACKAGE
HSOP (8)
TO-263
BODY SIZE (NOM)
4.89 mm x 3.90 mm
10.16 mm x 9.85 mm
LM22673,
LM22673-Q1
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Application Schematic
VIN
VIN
FB
BOOT
SW
LM22673-ADJ
VOUT
IADJ
SS GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.