November 2004
LM340/LM78XX Series
3-Terminal Positive Regulators
General Description
The 5V, 12V, and 15V regulator options are available in the
steel TO-3 power package. The LM340A/LM340/LM78XXC
series is available in the TO-220 plastic power package, and
the LM340-5.0 is available in the SOT-223 package, as well
as the LM340-5.0 and LM340-12 in the surface-mount TO-
263 package.
The
LM140/LM340A/LM340/LM78XXC
monolithic
3-terminal positive voltage regulators employ internal
current-limiting, thermal shutdown and safe-area compensa-
tion, making them essentially indestructible. If adequate heat
sinking is provided, they can deliver over 1.0A output cur-
rent. They are intended as fixed voltage regulators in a wide
range of applications including local (on-card) regulation for
elimination of noise and distribution problems associated
with single-point regulation. In addition to use as fixed volt-
age regulators, these devices can be used with external
components to obtain adjustable output voltages and cur-
rents.
Features
n Complete specifications at 1A load
n Output voltage tolerances of 2% at Tj = 25˚C and 4%
over the temperature range (LM340A)
n Line regulation of 0.01% of VOUT/V of ∆VIN at 1A load
(LM340A)
n Load regulation of 0.3% of VOUT/A (LM340A)
n Internal thermal overload protection
n Internal short-circuit current limit
n Output transistor safe area protection
n P+ Product Enhancement tested
Considerable effort was expended to make the entire series
of regulators easy to use and minimize the number of exter-
nal components. It is not necessary to bypass the output,
although this does improve transient response. Input by-
passing is needed only if the regulator is located far from the
filter capacitor of the power supply.
Typical Applications
Fixed Output Regulator
Adjustable Output Regulator
00778102
00778101
>
= 5V + (5V/R1 + I ) R2 5V/R1 3 I ,
Q Q
V
OUT
*Required if the regulator is located far from the power supply filter.
load regulation (L ) ≈ [(R1 + R2)/R1] (L of LM340-5).
r
r
**Although no output capacitor is needed for stability, it does help transient
response. (If needed, use 0.1 µF, ceramic disc).
Comparison between SOT-223 and D-Pak (TO-252)
Packages
Current Regulator
00778103
00778138
Scale 1:1
∆I = 1.3 mA over line and load changes.
Q
© 2004 National Semiconductor Corporation
DS007781
www.national.com