LM WRAS Approved Series
This is suitable for use in water, industrial wastewater and sewage, that can have
wide variations of temperature. This small design of switch is for use in more confined
spaces, wherethereisnotenoughroomforthelargerFFSMCtype.
The rounded body design and floating attitude prevents accumulation of solids on
the body. The switch has additional internal ballast, to bring the centre of gravity and
rotationclosetothecableentrypoint.
The switching element is a self cleaning type, that makes the complete switch
insensitive to humidity and condensation, allowing this type to operate in widely
fluctuatingtemperatures. Theswitchcontactsareratedat10Ampresistive.
Supplied, asstandard, with5metrescableandadjustablecounterweight.
Technical Specifications
Contact Form
LM10AW
LM10BW
N/C
LM10CW
N/O
C/O
Material
High Density Polyethylene
Temp Range
°C
°F
0 / +55 (WRAS approved up to +23°C)
+ 32 / +131
• For smaller tanks and
restricted space
Cable (standard length 5m)
Standard cable covering
Max. working pressure
With protective earth
WRC Approved
no earth
10 bar
• Use in sewer and
industrial waste
water
Electrical Specifications
Power Rating
Max
Max
AC : 750 VA DC : 180W
AC : 250 V DC : 110 V
10 A
Switching Voltage
Switching Current Max. Resistive
Switching Current Max. Inductive
• Shape avoids
“ragging”, in sewer
systems
AC : 4A DC : 1 A
It is necessary to use an auxiliary relay, when switching pump motors or any loads that are not
purely resistive.
• Unaffected by
suspended solids
• Operates in Turbulent
Fluids
47
15°
Off - On
Differential
On - Off
Cynergy3 Components Ltd
7 Cobham Road
129
15°
Ferndown Industrial Estate
Wimborne
Dorset BH21 7PE
Tel: +44 (0) 1202 897969
Minimum Cable Pivot
75
length 120mm
sales@cynergy3.com
CERTIFIED
ISO 9001
www.cynergy3.com
© 2014 Cynergy3 Components, All Rights Reserved.
Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.