TransientVoltage Suppression Diodes
Axial Leaded – 1500W > LCE series
RoHS
LCE Series
Description
The LCE Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
Features
• Glass passivated chip
junction in DO-201
Package
• EFT protection of data
lines in accordance with
IEC 61000-4-4 (IEC801-4)
Uni-directional
• 1500W peak pulse power
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Low incremental surge
resistance
• High temperature
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
• Excellent clamping
capability
• Plastic package has
underwriters laboratory
flammability classification
94V-O
•Typical failure mode is
short from over-specified
voltage or current
Maximum Ratings andThermal Characteristics
(TA=25°C unless otherwise noted)
• Matte tin lead–free plated
• Ideal for data line
applications
• Halogen free and RoHS
Parameter
Symbol
PPPM
Value
1500
Unit
W
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
Peak Pulse Power Dissipation by
10/1000μsTest Waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
Infinite Heat Sink atTL=75ºC (Fig. 5)
• IEC-61000-4-2 ESD
15kV(Air), 8kV (Contact)
• ESD protection of data
lines in accordance with
IEC 61000-4-2 (IEC801-2)
compliant
PD
6.5
W
°C
Operating Junction and Storage
Temperature Range
TJ, TSTG -55 to 150
Note:
1. Non-repetitive current pulse , per Fig. 3 and derated aboveTA = 25°C per Fig. 2.
Applications
TVS devices are ideal for the protection of I/O interfaces,
CC bus and other vulnerable circuits used in telecom,
V
computer, industrial and consumer electronic applications.
Additional Information
Datasheet
Resources
Samples
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/24/14