LC450210PCH
1/8 to 1/16 Duty Dot Matrix LCD
Controller Driver
Overview
www.onsemi.com
The LC450210PCH is the 1/8 to 1/16 duty dot matrix LCD controller driver. By
controlling this driver with a microcontroller, it is used in applications such as
character display and simple graphic display etc. This driver can drive a LCD
panel of up to 3,200 dots (16 16 dot font: 1-line display of up to 12 digits and
128 segments, 5 7 dot font: 2-line display of up to 40 digits). The operating
temperature range is from 40 to +105C.
Features
1. Selectable duty ratio by serial data: 1/8 duty to 1/16 duty
1/8 duty: 8 200 = 1,600 dots
1/9 duty: 9 200 = 1,800 dots
1/10 duty: 10 200 = 2,000 dots
1/11 duty: 11 200 = 2,200 dots
1/12 duty: 12 200 = 2,400 dots
1/13 duty: 13 200 = 2,600 dots
1/14 duty: 14 200 = 2,800 dots
1/15 duty: 15 200 = 3,000 dots
1/16 duty: 16 200 = 3,200 dots
2. Selectable LCD bias voltage ratio by serial data: 1/4 bias or 1/5 bias
3. Selectable inversion drive of LCD drive waveform by serial data: line inversion or frame inversion
4. Adjustable frame frequency of common and segment output waveforms and clock frequency of voltage booster by
serial data, for preventing interference with the frequency of the backlight.
5. Selectable operation modes by serial data: power-saving mode (maintains display data),
the state of display (ON, all ON, all OFF, all forced OFF)
6. Built-in oscillator circuit (built-in resistor and capacitor for oscillation)
7. Selectable fundamental clock operating modes by serial data: internal oscillator operating mode or external clock
operating mode
8. Input of serial data supports CCB* format (for 5 V and 3 V)
9. Selectable voltage range of power supply for logic block by setting REGE pad
(V ): +4.5 V to +5.5 V (5 V power supply (REGE = VDD))
DD
+2.7 V to +3.6 V (3 V power supply (REGE = VSS))
10. Built-in quadruple and quintuple voltage booster with discharge function
Base voltage of boosting (V
2): +3.2 V (Typ.)
(5 V power supply (REGE = VDD))
BTI
BTI
(V
1=V
2): +2.7 V to V [V] (3 V power supply (REGE = VSS))
BTI
DD
11. Power supply for LCD driver block (V
): +16.0 V (Typ.)
(V
(V
= 5 V, Quintuple voltage booster is used.)
= 3.3 V, Quintuple voltage booster is used.)
LCD
DD
DD
+16.5 V
+4.5 V to +16.5 V (range with external power supply)
12. Built-in contrast adjuster
LCD drive bias voltage (V
LCD
0): +4.65 V to +13.5 V (Typ.) (V
= 5 V, Quintuple voltage booster is used.)
= 3.3 V, Quintuple voltage booster is used.)
DD
DD
+4.65 V to +14.1 V
+4.65 V to +14.1 V
(V
(V
= 16.5 V with external power supply)
LCD
____
13. The initialization of this driver and the prevention of an unintended display are controllable by setting RES pad.
14. Wide range of operating temperature: 40 to +105C
15. CMOS process and chip with Au bumps
* Computer Control Bus (CCB) is an ON Semiconductor’s original bus format and
the bus addresses are controlled by ON Semiconductor.
ORDERING INFORMATION
See detailed ordering and shipping information on page 53 of this data sheet.
© Semiconductor Components Industries, LLC, 2017
August 2017 - Rev. 2
1
Publication Order Number :
LC450210PCH/D