LAN9250
1.2
Buffer Types
TABLE 1-2:
BUFFER TYPES
Buffer Type
Description
IS
Schmitt-triggered input
Variable voltage Schmitt-triggered input
VIS
VO8
Variable voltage output with 8 mA sink and 8 mA source
Variable voltage open-drain output with 8 mA sink
VOD8
VO12
VOD12
VOS12
VO16
PU
Variable voltage output with 12 mA sink and 12 mA source
Variable voltage open-drain output with 12 mA sink
Variable voltage open-source output with 12 mA source
Variable voltage output with 16 mA sink and 16 mA source
50 µA (typical) internal pull-up. Unless otherwise noted in the pin description, internal pull-
ups are always enabled.
Internal pull-up resistors prevent unconnected inputs from floating. Do not rely on internal
resistors to drive signals external to the device. When connected to a load that must be
pulled high, an external resistor must be added.
PD
50 µA (typical) internal pull-down. Unless otherwise noted in the pin description, internal
pull-downs are always enabled.
Internal pull-down resistors prevent unconnected inputs from floating. Do not rely on internal
resistors to drive signals external to the device. When connected to a load that must be
pulled low, an external resistor must be added.
AI
AIO
Analog input
Analog bidirectional
ICLK
Crystal oscillator input pin
Crystal oscillator output pin
Low voltage PECL input pin
Low voltage PECL output pin
Power pin
OCLK
ILVPECL
OLVPECL
P
DS00001913B-page 6
2023 Microchip Technology Inc. and its subsidiaries