L7983
Datasheet
60 V, 300 mA synchronous step-down switching regulator with 10 µA quiescent
current
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3.5 V to 60 V operating input voltage
Fixed output voltage (3.3 V and 5 V) or adjustable from 0.85 V to VIN
300 mA DC output current
Dynamic low consumption mode to low noise mode selection
10 µA operating quiescent current (L7983PU33R, VIN > 24 V, LCM)
2.3 µA shutdown current
200 kHz to 2.2 MHz programmable switching frequency
Optional spread spectrum (dithering)
Internal soft-start
Enable / adjustable UVLO threshold
Synchronization to external clock
Internal compensation network
Internal current limiting
Overvoltage protection
Output voltage sequencing
Thermal shutdown
Applications
•
•
•
•
•
Designed for 12 V, 24 V and 48 V buses
Battery powered applications
Decentralized intelligent nodes
Fail safe system
Maturity status link
L7983
Sensors and low noise applications (LNM)
Description
The L7983 device is a step-down monolithic switching regulator able to deliver up to
300 mA DC based on peak current mode architecture.
The output voltage adjustability ranges from 0.85 V to VIN. The wide input voltage
range and adjustable UVLO threshold meet the specification for the 12 V, 24 V and
48 V industrial bus standards.
The “Low Consumption Mode” (LCM) is designed for applications active during idle
mode, so it maximizes the efficiency at light load with controlled output voltage ripple.
The “Low Noise Mode” (LNM) makes the switching frequency constant overload
current range, meeting the low noise application specification. The L7983 supports
dynamic LCM to LNM transition.
The soft-start time is internally fixed and the output voltage supervisor manages the
reset phase for any digital load (microcontroller, FPGA, etc.).
The internal compensation network features high noise immunity, simple design and
saves on the component cost.
The RST open collector output can also implement output voltage sequencing during
the power-up phase.
DS13354 - Rev 1 - October 2020
www.st.com
For further information contact your local STMicroelectronics sales office.