KXPB5 Series
Accelerometers and Inclinometers
FEATURES
MARKETS
APPLICATIONS
Very Small Package - 3x5x0.9mm LGA
Low Power Consumption
Hard Disk Drives/Laptops
Free-fall Detection
Multiplexed Analog or Digital SPI Interface
Internal 1KHz Low Pass Filter
Low Noise
Cell Phones and Handheld PDAs
Gesture Recognition
Game Controllers & Computer Peripherals
Inclination and Tilt Sensing
Cameras and Video Equipment
Lead-free Solderability
Excellent Temperature Performance
High Shock Survivability
Image Stabilization
Sports Diagnostic Equipment/Pedometers
Selectable Power Reduction Modes
User Definable Bandwidth
Static or Dynamic Acceleration
Personal Navigation Devices
Factory Programmable Offset and Sensitivity
Self-test Function
Inertial Navigation and Dead Reckoning
PROPRIETARY TECHNOLOGY
These high-performance silicon micromachined linear accelerometers
and inclinometers consist of a sensor element and an ASIC packaged in
a 3x5x0.9 mm Land Grid Array (LGA). The sensor element is fabricated
from single-crystal silicon with proprietary Deep Reactive Ion Etching
(DRIE) processes, and is protected from the environment by a
hermetically-sealed silicon cap at the wafer level.
The KXPB5 series is designed to provide a high signal-to-noise ratio
with excellent performance over temperature. These sensors can ac-
cept supply voltages between 2.5V and 5.25V. Sensitivity is factory
programmable allowing customization for applications requiring from
±1.5g to ±6.0g ranges. Sensor bandwidth is user-definable.
Place holder
for new photo.
The sensor element functions on the principle of differential
capacitance. Acceleration causes displacement of a silicon structure
resulting in a change in capacitance. An ASIC, using a standard CMOS
manufacturing process, detects and transforms changes in capacitance
into an analog output voltage, which is proportional to acceleration.
This voltage is digitized by an on-board A/D converter and is accessed
via a serial peripheral interface (SPI).
36 Thornwood Dr. - Ithaca, NY 14850 USA tel: 607-257-1080 - fax: 607-257-1146 - www.kionix.com - info@kionix.com
“Kionix” is a registered trademark of Kionix, Inc. Products described herein are protected by patents issued or pending. Information provided
in this document is believed to be accurate and reliable but is not guaranteed. Kionix does not assume responsibility for its use or distribution.
No license is granted by implication or otherwise under any patent or other rights of Kionix. Kionix reserves the right to change product
specifications or discontinue this product at any time without prior notice.
© Kionix 2010 All Rights Reserved
July 27, 2010 Rev. 0.2
Page 1 of 2