MODEL: KMP
Final Control Elements
OUTPUT
24 V AC switch
VALVE POSITIONER
(for 24 V AC motor)
[2] POWER INPUT
AC Power
Functions & Features
• Solid-state valve positioner
• Direct drive of 24 V AC motor
• Split control
B: 100 V AC
C: 110 V AC
D: 115 V AC
• Direct or reverse action
F: 120 V AC
• Output circuit designed with no mechanical contact
ensures long lasting reliability
• Feedback potentiometer 100 Ω – 10 kΩ
G: 200 V AC
H: 220 V AC
J: 240 V AC
Typical Applications
[3] OPTIONS
blank: none
• Proportional position control for electric valves or dampers
in air conditioning systems
/Q: With options (specify the specification)
50
(1.97)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
80
(3.15)
/C02: Polyurethane coating
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
132
(5.20)
mm (inch)
GENERAL SPECIFICATIONS
Construction: Plug-in
MODEL: KMP–[1]–[2][3]
Connection: M3.5 screw terminals
Screw terminal: Chromated steel (standard) or stainless
steel
ORDERING INFORMATION
· Code number: KMP-[1]-[2][3]
Specify a code from below for each of [1] through [3].
(e.g. KMP-1-B/Q)
Housing material: Flame-resistant resin (black)
Sensitivity adjustment: 0 – 20 % of total feedback resistance
at 0 % side; 70 – 100 % at 100 % side (front)
Deadband adjustment: 2 – 20 % (front)
Isolation: Input to output to power
• Specify the specification for option code /Q
(e.g. /C01/S01)
• Setpoint Signal and position characteristics
[1] I/O CHARACTERISTICS
Current
1, 2, 3, 4 and V1 in the graph are I/O characteristics model suffix codes.
100%
100%
1: 4 – 20 mA DC (Input resistance 62.5 Ω)
2: 4 – 20 mA DC (Input resistance 62.5 Ω)
3: 4 – 12 mA DC (Input resistance 62.5 Ω)
4: 12 – 20 mA DC (Input resistance 62.5 Ω)
Voltage
2
1
V1
3
4
V1: 0 – 10 V DC (Input resistance 10 kΩ min.)
See the graph on the General Specification section.
0
0
4
12
20mA
0
10V
SETPOINT
SETPOINT
FEEDBACK RESISTANCE
Total resistance 100 Ω – 10 kΩ
KMP SPECIFICATIONS
ES-3630 Rev.3 Page 1/4
http://www.m-system.co.jp/