• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
Land Pattern
c
1
2.2
1.2
Tolerance: 0.1
in mm
Temperature Profile
c
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T3
T4
T2
T3
T2
t2
T1
t2
t3
Limit Profile
T1
Standard Profile
Standard Profile
t1
t1
time (s)
time (s)
Standard Profile
Heating
Standard Profile
Heating
Peak
temperature
(T3)
Peak
temperature
(T3)
Pre-heating
Pre-heating
Cycle
Cycle
of reflow
of reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
150 to 180°C 60 to 120sec. 220°C
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
30 to 60sec. 245 3°C
2 times
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1 time
Limit Profile
Heating
Temp. (T4) Time (t3)
Peak
temperature
(T5)
Pre-heating
Temp. (T1) Time (t1)
Cycle
of reflow
150 to 180°C 60 to 120sec. 230°C
30 to 50sec. 260 +5/-0°C 2 times
Soldering Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of soldering iron
350 10°C
3sec. max.
30W max.
1 time
Notice (Storage and Operating Conditions)
c
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
2. Before using trimmer capacitors, please store under
the conditions of -10 to +40°C and 30 to 85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
5. Do not store under direct sunlight.
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
6