SEMICONDUCTOR
KIA431AC/BC Series
BIPOLAR LINEAR INTEGRATED CIRCUIT
TECHNICAL DATA
PROGRAMMABLE PRECISION REFERENCES
The KIA431 Series integrated circuits are three-terminal programmable shunt regulator diodes.
These monolithic IC voltage reference operate as a low temperature coefficient zener which is programmable from Vref
to 36 volts with two external resistors. These devices exhibit a wide operating current range of 1.0 to 100mA with a
typical dynamic impedance of 0.22Ω .The characteristics of these references make them excellent replacements for
zener diodes in many applications such as digital voltmeters, power supplies, and op amp circuitry. The 2.5 volt
reference makes it convenient to obtain a stable reference from 5.0 volt logic supplies, and since the KIA431 Series
operates as a shunt regulator, it can be used as either a positive or negative voltage reference.
FEATURES
· Low Dynamic Output Impedance : 0.22Ω (Typ.).
· Sink Current Capability of 1.0 to 100mA.
· Equivalent Full-Range Temperature Coefficient of 50ppm/℃ (Typ.).
· Temperature Compensated for Operation Over Full Rated Operating Temperature Range.
· Minimum Cathode Current for Regualation : 600μA(Max).
LINE UP
PIN CONFIGURATION (SOT-23)
3
Type No.
Package
TO-92
Marking
KIA431ACP
KIA431BCP
KIA431ACF
KIA431BCF
KIA431ACM
KIA431BCM
-
3
-
TOP
VIEW
3E
SOT-89
SOT-23
1
3F
4AC
4BC
2
1
2
1. Cathode 2. Ref 3. Anode
BLOCK DIAGRAM
Cathode (K)
+
Cathode (K)
Reference (R)
-
Reference (R)
Anode (A)
2.5V
ref
Anode (A)
2015. 4. 01
Revision No : 4
1/7