RF Filter 100 KHZ to 5.0 GHz Single in line package
The content of this specification may change without notification 09/18/08
Wide Band
RF Eliminate Filter
KHLC-04s
Isolation vs Frequency
Feature
⋅
⋅
⋅
Single in Line Package
Broad Bandwidth: 100 kHz to 5.0 GHz (-20 dB)
Comply with Large Current (1.5 A)
0
-10
-20
-30
-40
-50
-60
-70
Nowadays, the digital clock signal which is used as high
frequency applications makes the harmonic wave delivered to the
DC power supplies extend the frequency range in GHz with one
digit to two digits. Under this circumstance in performing a digital
signal in high speed transmission, only the conventional method
like using a bypass capacitor can not remove high harmonic wave
which is transmitted to the power supplies. This power filter
KHLC-04s deletes harmonic wave signal which is not necessary
to be transmitted to the very broad bandwidth of 100 kHz to 5 GHz
(-20 dB).
The package is designed in single in line package where IC and
other chips can be mounted near the power supply terminals (pins),
and this makes it possible for ideal mounting position electrically.
1M
10G
Frequency [ Hz ]
Electrical Specifications
Absolute Maximum Rating
Parameter
Value (max.)
Unit
mA
V
Parameter
Value
Condition
1,500
10
100 kHz ~ 5.0 GHz (Typ.)
280 kHz ~ 3.8 GHz (Typ.)
350 kHz ~ 1.2 GHz (Typ.)
−
−
−
20 dB
30 dB
40 dB
−
Rated Current
Rated Voltage
Band Width
DC Resistance
+
240 (8 sec)
40 ~ 85
65 ~
Soldering Temperature
Operating Temperature
Storage Temperature
C
−
+
0.13
Ω max.
C
−
+150
C
Dimensions
UNIT : mm
Schematics
4.0
KF1
Lo
KF2
3
1
1
2 3
C
p1
C
1
C
p2
C
p3
2
0.15
1.27
1: Vcc (IN)
2: GND
3: Vcc (OUT)
0.4
Specifications of products are subject to change without notice.
188 Technology Drive, Unit H, Irvine, CA 92618
American Accurate Components, Inc.
TEL: 949-453-9888 FAX: 949-453-8889