JMicron/JM20330
JM20330
Serial ATA Bridge Chip
Description
JMicron’s JM20330 is a single chip solution for serial and parallel ATA translation. It includes the
Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA
physical, link, and transport layers are compliant to Serial ATA 1.0. JM20330 supports a 1.5GHz data
rate, and scalable to 3.0 GHz data rate by directly doubling the internal clock source. The application
layer supports both the ATA register command set and PACKET command set, which could drive both
Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc.
The Serial ATA and the Parallel ATA application layer support both host and device operation and can
be configured through a single pin.
Features
Quick Reference
Serial ATA 1.0 Specification compliant
Automatic Serial ATA 3.0/1.5 Gbps speed
negotiation
Signal Bit Rate
3.0/1.5 Gbps
-3.0% to 0.0
3.3V and 1.8V
2000 V
Spread Spectrum
Power Supply
ESD Protection
Host and Device
Adj. Amplitude
Adj. Pre-emphasis
Package
ATA/ATAPI PIO mode 0 to 4
ATA/ATAPI Ultra DMA of transfer rate 16.7,
25, 33, 48, 66, 100, 133, and 150MB/s.
ATA/ATAPI LBA48 addressing mode
associated with 2-byte sector count
Support Serial ATA hot-plug
Ultra low power consumption
Work for both AC and DC couple between
the transmitter and the receiver
Provide specified OOB signal detection and
transmission
Programmable
2 levels
4 levels
64-pin TQFP
All SATA products
Mass storage devices
Optical storage
Applications
Support Spread Spectrum Clocking to reduce
EMI
Dongle bridge
Storage system
Support 20MHz, 25MHz, 30MHz or 40MHz
Reference Clock
Support Partial/Slumber power management
Provide adjustable TX signal amplitude and
pre-emphasis level
Master/Slave support
Version 1.0
© JMicron 2003. All rights reserved.
May 2003
Page 1
Copying prohibited.
本 社
関西営業所
東京都世田谷区三軒茶屋 2-11-22 サンタワーズセンタービルꢀ〒154-8539ꢀ/ꢀTEL: 03 (3487) 8502 / FAX: 03 (3487) 8825 / e-mail: jmicron@mcmjapan.com
大阪市淀川区西中島 3-7-13 新大阪サクセスビルEASTꢀ〒532-0011ꢀ/ꢀTEL: 06(6885) 1688 / FAX: 06 (6885) 1721 /