JFCW10 SERIES
10 Watt DC/DC Power Converters
Rev B
FEATURES
• High Efficiency up to 91%
• Built-in EN55022 Class B Filter
• Remote On/Off Control
• 10 Watts Maximum Output Power
• 4:1 Ultra Wide Input Voltage Ranges
• Six-Sided Continuous Shielding
• Ultra Low Quiescent Current
• No Minimum Load Requirements
• Single and Dual Outputs
• Short Circuit, Over Voltage, Over Load, & Under-Voltage Protection
• Wide Operating Temperature Range: -40°C to +85°C
• Compliant to RoHS EU Directive 2011/65/EU
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• CE Mark meets 2006/95/EC, 2011/95/EC, and 2004/108/EC
• Optional Heatsink Available (Suffix “HC”)
• Fixed Switching Frequency
Size:
DESCRIPTION
1.00 x 1.00 x 0.39 inches
The JFCW10 series of DC/DC power converters provides 10 Watts of output power in an industry standard 1.00” x
1.00” x 0.39” package and footprint. This series has single and dual output models with 4:1 ultra wide input voltage
ranges of 9-36VDC and 18-75VDC. Some features include high efficiency up to 91%, 1600VDC I/O isolation, six-sided
shielding, and remote on/off control. These converters are also protected against short circuit, over voltage, over
load, and under-voltage. All models are RoHS compliant and have UL60950-1, EN60950-1, and IEC60950-1 safety
approvals. This series is best suited for use in wireless networks, telecom/datacom, industry control systems,
measurement equipment, and semiconductor equipment.
(25.4 x 25.4 x 9.9 mm)
Options:
• Negative Logic Remote ON/OFF
• Without Trim pin
• Without CTRL Pin
• Heatsink
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Output Current
Output
Voltage
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
Output
No Load
Output
Power
9.9W
10W
10W
10W
10W
9.9W
10W
10W
10W
10W
Maximum
Capacitive Load
3500µF
2500µF
430µF
Model Number Input Voltage Range
JFCW24S33-10
Efficiency
Ripple & Noise Input Current
Min Load
Max Load
3000mA
2000mA
830mA
670mA
416mA
3000mA
2000mA
830mA
670mA
416mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
40mVp-p
40mVp-p
60mVp-p
60mVp-p
60mVp-p
40mVp-p
40mVp-p
60mVp-p
60mVp-p
60mVp-p
6mA
6mA
6mA
6mA
6mA
4mA
4mA
4mA
4mA
4mA
85%
87%
90%
91%
90%
85%
87%
90%
90%
90%
JFCW24S05-10
JFCW24S12-10
JFCW24S15-10
24 VDC
(9 – 36 VDC)
350µF
125µF
3500µF
2500µF
430µF
JFCW24S24-10
JFCW48S33-10
JFCW48S05-10
JFCW48S12-10
JFCW48S15-10
48 VDC
12 VDC
15 VDC
24 VDC
(18 – 75 VDC)
350µF
125µF
JFCW48S24-10
DUAL OUTPUT MODELS
Output Current
Output
Voltage
±5 VDC
±12 VDC
±15 VDC
±5 VDC
Output
No Load
Output
Power
10W
10W
10W
10W
10W
10W
Maximum
Capacitive Load
±1440µF
±250µF
Model Number Input Voltage Range
Efficiency
Ripple & Noise Input Current
Min Load
0mA
Max Load
±1000mA
±416mA
±333mA
±1000mA
±416mA
±333mA
JFCW24D05-10
24 VDC
40mVp-p
60mVp-p
60mVp-p
40mVp-p
60mVp-p
60mVp-p
6mA
6mA
6mA
4mA
4mA
4mA
87%
89%
89%
87%
89%
89%
JFCW24D12-10
JFCW24D15-10
0mA
0mA
0mA
0mA
(9 – 36 VDC)
±180µF
±1440µF
±250µF
JFCW48D05-10
JFCW48D12-10
JFCW48D15-10
48 VDC
±12 VDC
±15 VDC
(18 – 75 VDC)
0mA
±180µF
NOTES
1. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor
between the Trim pin and either the +Vout pin or the –Vout pin.
2. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor suggested is Nippon chemi-con KY
series, 220µF/100V.
3. The JFCW10 series standard modules meet EN55022 Class A without external components and meets Class B with external components. See page 4 for more
details.
4. Both positive logic and negative logic remote on/off control is available. Positive logic remote on/off comes standard; for negative logic remote on/off add
the suffix “R” to the model number (Ex: JFCW24S05-10R).
5. There are several different options available for this series. Please see the “Model Number Setup” on page 5 for all options and ordering information.
6. Optional heatsink is available. Please call factory for more information.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
10/31/2014
Page 1 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
